The Jalopy Journal
I have no binding whatsoever. What part hitting what are you talking about??
"The accelerator pump won't work with it that tight" ??
Many thanks!
A good idea. I’m more likely to do this in front of the distributor and include a breather on it. This will be relatively hidden. I’m still...
And If I put the original road draft oil separator canister back on would I get away with not doing the PCV conversion? That way I’m simply adding...
Thanks mate. I appreciate that.
That is an option as I do have room. Is there any issues with the breather / filler tube to sitting low in the valley? As in, filler tube just...
Thanks for the link
I've posted something similar to your idea in the comments below.
Not ideal removing a valve cover to add oil but I'm happy to do this if I need to. I use phillip head bolts for the valve covers. Super easy to...
Thanks for the info. If I was to put the oil separator canister back on and run a remote style breather? My thoughts - drill and tap the valley,...
Thank you.
It's a hi rise style. [IMG]
Thanks for all your responses. 1. If I was to install an oil filler tube on my new manifold can the tube and breather sit low? Essentially...
I have found a lot of threads that have ALMOST answered my question. I have a 327 with the original oil separator canister removed which I have...
Many thanks! Sent from my iPhone using H.A.M.B.
Great information. Thank you. I’ll need to sit down and read it again and get my head around it. Sent from my iPhone using H.A.M.B.
Hi all, I've been told that I should install a O2 Sensor to help tune my Hilborn MFI. True or false? and if so, your thoughts please. Running...
When I have some spare time I’d like to separate one and have a look. A fun little excuse to loose some time [emoji1303] Sent from my iPhone...
I like it! [emoji6][emoji1303] Sent from my iPhone using The H.A.M.B. mobile app
Thank you [emoji1303] Sent from my iPhone using The H.A.M.B. mobile app
That’s a massive difference in cost re nozzles. Definitely worth looking at indeed. I’ll get it running with the Hilborn nozzles first and look at...
I can’t see how you’d replace the mesh without separating the 2 piece nozzle that’s been soldered. Sent from my iPhone using The H.A.M.B....
Thank you! Sent from my iPhone using The H.A.M.B. mobile app
Gas Sent from my iPhone using The H.A.M.B. mobile app
I’m trying to clean my nozzles and if I remove the mesh I’ll be able to clean them so much easier. I don’t want to increase or decrease flow, just...
Hi all, Would removing the mesh from inside my Hilborn 6A nozzles cause any flow issues, or have any negative effects? I’m assuming it’ll...
Thank you. If the difference between the eyes is within 2” we should be ok then? Sent from my iPhone using H.A.M.B.
Hi all, Please see diagram attached. Sorry for the poor quality. My (silly) question is: If the chassis isn’t running horizontal or is stepped...
Thank you. Informative and helpful information you’ve provided. Ladder bars and coil overs are out of the question on my project, so it’s leaf...
Separate names with a comma.
The Jalopy Journal
