The Jalopy Journal
The '33 has a trunklid and not a rumbleseat and the trunk latch panel had holes on both ends and by the latch that drained into the floor,i went...
Another vote for dd...
I had Danny's radiator in Zanesville check the original radiator in the '33.
I'm running NGK B6L's in a stock '52 EAB with a single 94,Bubba's distributor,plugs gapped at .025 been in for a year now with 4000 miles on them...
Speedway...
I used a '78 and up Malibu rear on the '33 with 15x7 wheels and 225/75r15 tires,can't remember the width of it...
Same car a '69 Chevelle...
One from last fall.
Dad's '33,he started on the car for the owner of the car in 2002 and the owner didn't want to spend any money on it and he bought it in 2008.Took...
This is a '33 3 window with 35,000 miles,if they are the same,body tag is above the patent plate.
Current pic of the '33
Everything i have has a cork gasket on it,but the hole is smaller.
It is a tight fit if using the original cross member,i made 4" spacers on the motor mounts to get the crank pulley above the cross member,never...
Sometimes there is a date code inside the tach.
X2 on the vent for the box,easy to do...
A nice place for a show and some very nice cars...
I have a EAB engine with a rebuilt stock pump,carries 55 going down the road...
Had the '33 out,1800 miles so far this year.
My dad's '33 ford...
Nice color,you will be happy with Bubba's distributor...
Main thing on the flatheads is to clean it up and check for cracks in the valve to cylinder area,#3 seems to be a bad spot on the ones i've had.
Plan on going up on Sunday,i have always liked the show and the swap meet, been going off and on since the mid 80's...
I cut the road draft tube and put in a grommet for the pcv valve,stock oil fill tube with breather and getting my vacuum from the stock 8ba intake.
Dad's '33 ford back on the road...
DAK RAT is right on the money,the small bracket helps support the weight of the starter.I don't have a picture of one either...
Nice roadster oldschool...
Nice build,all the hard work is worth it when you get to drive them down the road the first time...
I'd stick with 3/8"...
Nice looking rpu...
Nice color combo...
Separate names with a comma.