The Jalopy Journal
The form for a duplicate is available on the SCDMV website. Print it off, have the owner sign it, write a check for $15, and send it to SCDMV....
There is a rubber gasket/seal that goes in the slot on each side and the bottom. Also a rubber seal between the WS hinge and metal header panel....
Actually spark plug wire covers on a Desoto Hemi. Does anyone have any trick ideas that they have used to paint the indented letters on the wire...
Wow, as I heard someone say onetime, that's as smooth as a Moose's root.
Starting price of $200.00 should tell you something.
It's never "safe" to assume anything.
http://www.wescottsauto.com if you need frame dimensions.
Go to u-haul with your proposed tow vehicle and see what they say.
If you need to run the fusible link from the battery, at least get a new battery cable that has the #10 wire included with the terminal and splice...
Don't want to rain on the parade, but the first thing to do before you spend any money on parts, if you don't have a valid title for the car, find...
Whizzbang nailed it. Makes one wonder about the integrity of the rest of the car.
It may not be necessary to use the blocks, but you will be glad you did when it comes time to adjust the doors for fit. Attached is a diagram for...
While you are changing the engine, move the rear end back 1.5" to center the wheel in the opening. Common on most Chrysler Corp cars.
Maybe not for your case, but buffing wheels can be mounted in place of a table saw blade. This would provide a large surface to rest parts.
Along with all the other good/bad/dangerous advice posted above, you may want to consider this switch, a Carter oil pressure safety switch, no....
Did you fab the frame to Model A dimensions? Maybe someone else will offer advice, but your frame looks to wide, and I think the kick-up at the...
Check this for a mounting system, or an idea to fab your own. http://www.dagelsstreetrods.com/gas%20tank%20kits.htm
This one will hide the clamp. http://www.speedwaymotors.com/Garage-Sale-Earls-Chrome-Econ-O-Fit-Hose-Clamp-24,49845.html
The doors do not have a garnish similar to the rear window. The door only has the single trim piece at the bottom of the window opening. This...
Don't know about the "inspiration", but post a question and you are sure to get varied "advice". Welcome from the Upstate of South Carolina....
You can buy the complete subframe assembly, put it on a table and start working on the body. Cost is likely to be the same if you build it...
Weld a 1/4" steel plat on top of the mount and welded to the frame rail. Then take 1/4" off the wood block. Henry made them stronger than what...
For all you boat guys, thought someone might be interested in this boat up for auction....
Welcome from a fellow South Carolinian.
Overheating must be a Northern term. Here in the South, the condition is just plain "damn thing is running hot and boiling the water out".
Check National Parts Depot for a brake hose for a 65 -73 Mustang.
Chrysler engineering was always ahead of whoever was in second place.
With all the above advice, I offer a tip on removal of a body. When I removed my A coupe body, I removed the wheels, set the chassis down on...
It holds a wobbly shaft while you put on a rickety gear. Tricky operation, most of the time completed while consuming cold adult beverage.
Here an idea if you have one of those welders. Remove the inside components, leaving the metal shell, fabricate a BBQ grill, pull same to a...
Separate names with a comma.