The Jalopy Journal
Hollywood, did it fit?
Oh, and I also use water out of my De-Humidifier. Clean water, and then I use a conditioner for corrosion and lube for the pump.
BeCool makes a bunch of types though. Down flow, crossflow, dragster, etc. They make good ones and cheap ones? I need a Radiator for my 409, which...
I opened my pool skimmer the other day to find a 6 ft Black snake inside curled up. It shot out of there like a spring, missed my face by about a...
Pontiac man myself....Pics would be great. But....no 56 for me. I have a 67 GTO.
I wasnt sure if the fluid did lubricate it also. I was told that the shaft is like a running drillbit out of the back of the Generator... PS> I...
I have the Power steering pump on the back of the generator on my 59, 235. I removed the power steering equipt. Going to use the manual steering...
Thanks Crager... Willy's...check out my link above. It does come with a new flexplate. $410.00 with FP and starter.
Yes, you guys are correct. More info was needed. I was hoping lots of guys would know instantly what I was talking about. Thanks Mike...looks...
From what I have read, the 59 235, with a PG trans has a very distinct bolt pattern. Langdons sells a adapter plate that bolts on the engine,...
Bump, nobody?
Putting the finishing touches on the 1959, 235. But I have a few questions, your old school help is very grateful. #1 Eliminating the road draft...
Ok, I might not follow completely sorry. I glued the gasket to the cover. But, do I glue it to the engine side also?...I mean the lifters are flat...
I ended up making my own pushrod, I did this and the pedal had less travel. This solved my problem. I dont think the piston can move as much as...
I have a new side cover for the 235 inline. Do I need sealer on the gasket also? Black rubber, if it matters. Valve cover gasket is Cork, I...
Has anyone tried or currently using Langdons trans adapter plate. From the ironglide to a standard Chevy trans? 235 inline, 1959 Any feedback?
Yep, thanks... Heat, more heat and a 2 ft long pair of channel locks!
I am replacing the oil pump in my 1959 235 engine. I have removed the old pump and have it on the counter to change over the oil lines and the...
Boy, thats a pretty car. :D If I could, what is the difference between the early 235's and the later ones.. I see some of the intakes being pre 54...
Yea, I have been thru most of those links, Thanks again. Allot of V8's out there. I am trying to save the original 235 engine. But I am looking...
Also, one of the reasons I had doubts, was when I installed a new Offey Valve cover, the hole for the breather was in the front. Stock 59 235 6...
I was told that the front carb on a dual set up would/probably hit the hood. Since the front of the hood tapers down. I am fixing the 235 up, and...
Yes, your a 59 guy as well or yes, the dual carb will fit?...LOL
Any other 1959 guy's here? Would love to get some tips... My big question is, will a dual carb set up for my 235 fit under the hood, before I...
I dont have the bracket on the frame for the Z bar. But you are right, and it would probably cost the same.
Thanks again for the tips. I believe in 59, that the bolt pattern from a V8 is different then the Inline 235, hence my issues. Once/Or if I get...
No sorry, I meant convertors out of the Aluminum PG's,. Yea, 3 total gears, is what I meant. I think it might wake the car up a bit with 3 gears...
Thanks, I was weighing costs also. It would be sweet to have a third gear also. From the homework I have done, the later convertors will not work....
This might be a retarded question....But, Does anyone make a high performance head for a inline 6? A 235 engine? Or does anyone build up the old...
I pulled the 235 out of my 59 Chevy. The Trans has a pretty good leak. I thought I could pull the convertor, but it seems to be a built in unit....
Separate names with a comma.