The Jalopy Journal
the clutch you have is ok. get a 3/8 spacer made to go between trans and bellhousing. usually cost about 20 bucks at a machine shop. splines on...
s10 clutch for a 4.3 will be an 11" with the 14 spline. I did the swap couple years ago on my 53 chevy truck. check length of input shaft, some...
found a solid 31 model a sport coupe. are parts available and how much trouble to convert to a five window coupe? I am really liking coupes now....
you can use clutch set for a mid 80's 4.3 which is 11''. i have this in my 53 5 window with a s10 5 speed. you also need a quarter inch spacer...
i have basic same motor in my 53 5 window. 283 with s10 t5, 3:42 gears. love it.
yes
thanks guys. I did get astro van clutch,and also considering cutting clutch hub and making splines longer. didn't think it was that much trouble...
thank you for you reply. i cut the bearing retainer to match size of 3 speed retainer still clutch wont work.
I have 283 with a 403 bellhousing what clutch setup should i use? currently have a stock setup that i switched s10 clutch disc in. can,t seem to...
dummy me. the crank i was gonna use got wet and has surface rust on it. any ideas how to remove rust?
ok thanks
thanks for the options.
got a 283 with straight axle and original steering. shortie block huggers from speedway not fitting. any suggestions?
thank you.
what headers will fit 1953 chevy 5 window with 283 and the stock steering and drop axle set up? blockhuggers from speedway not working. any...
Separate names with a comma.
The Jalopy Journal