The Jalopy Journal
If this is a Vortec motor (eight vertical bolts) I would just cut the heads off the stubborn ones and pry the intake off. Then weld nuts onto the...
Head on left requires guidance either plates or s/a rockers. Head on right does not. [ATTACH]
Hoop98 Im building another 283 along the same lines as this and was wondering if you would mind running one more cam for this comparison. Elgin...
Having the exact same issue with a 54 willys station wagon at the moment. Found these at Coker....
If your running a GM column, Get a harness out of a jeep cj from the late seventies to early eighties. Its a very basic harness and it plugs into...
[attach]
Also in addition to what has been mentioned above. The one piece rear main seal blocks take a different flexplate/flywheel due to the last...
Some gear oils wont play nice in certain transmissions, gl5 grade in a tranny with bronze bushings or syncros can cause shifting problems....
Not working for me either, and i was on at lunch. [ATTACH] :eek: :confused: :eek:
This is a pretty good episode of Horsepower TV on the subject....
Dragged my balls all the way to the garage this am, and i have a 30 inch inseam. Had to put the chains on the plow truck just to get out of my own...
Treat the car as a frame off resto if it was under salt water. Aside from the tires, glass and weather striping, salt water will corrode anything...
Back to the top. This is one I hope makes its way back home, so much heart and soul in it.
How is this not pinned to the top? Anyway BTTT DDC
Back to the top, lets find this car!
Back to the top!
Ht, I read your build thread from beginning to end. Got to the last page and felt like I got kicked in the nuts. Cant imagine how you feel right...
They test fired it! http://www.foxnews.com/leisure/2012/10/03/successful-test-firing-for-1000-mph-car/?intcmp=features
Throw the clutch :)
Corwell tools, still made in this country,no bs on you warranty,every bit as good as Snap-Off ( I call them this due to my box full of busted...
dont forget to drill the crank snout for a harmonic balancer bolt.
It will drop the idle slightly and you will be able to move the vehicle around on level smooth ground, without having to turn 3000 rpm.And you...
Ha. 37gmc beat me to it.
Voltage?
x2 :)
What are you running for a fuel pump?
If you can blow through the fuel inlet with the carb upside down , then there is something wrong with the float or needle/seat. And by "blow" I...
better image of intake [IMG]
what do i win?
57-58 plymouth fury ? [IMG]
Separate names with a comma.
The Jalopy Journal
