The Jalopy Journal
Retired last year and moved to Florida to get away from cold and snow.
Anyone need a 40 Std nose; never used front glass fenders, 40 Std grill, 39 Dlx hood? Switched it for a Deluxe nose on my 40.
I'll be there too. I live in Columbus by Tuttle Mall but I'm working in Lexington, KY. I'll be driving the 40 back on Wednesday or Thursday. Drive...
I'm using a PRC aluminum radiator in my 40 Tudor. Works great, runs a little cool for my fuel injected motor though, about 175deg with a 190deg...
I bought a compact Vintage Air for my 40 Tudor at Columbus GG from Northern Kentucky Street Rod Parts for about $200 less than the online price...
Lots of good ideas to work with. I have the computer in the side kick panel so I might have to move it to run the hoses through the side. Looks...
Since you’re still building your 40, it would be a whole lot easier to install if you pulled the dash out so you don’t have to stand...
Just bought a Vintage Air Gen II for my 40 at Good-Guys. Getting ready to put it in, any tips or don't do's?
Found an original dealer booklet on the web for a friend’s 36 Master, I don’t remember where, but it said remove the chin panel at the...
I have a PRC in my 40. Works so well I need to put in a higher thermostat because it run too cool, about 175 deg, for my TPI. 195 deg isnt hot enough.
50 Merc 2 door sedan for the 11th grade then a 57 Chevy wagon body I payed 25 bucks for and I rebuilt a 30 over 265 four barrel, 357 injection...
I installed a Fatmans MII in my 40 Tudor and I've got abot 10K on it without any problems. I also installed a TCI MII under a friends 37 Chevy and...
I didn't realize there was anyone else from central Ohio on HAMB. Good to know.
I'll be there again this years with my red primer 40 Tudor. It was a Standard but I put a Deluxe nose on it last year.
I converted my 40 Tudor to a single window. Bought the front metal track from a window felt/rubber dealer at the Springfield swap meet and fabed...
I'll be there with my 40 Tudor Dlx TPI with red PPG primer/sealer.
I read a couple of places that the rear sway bar should be about half of the diameter of the front sway bar. I think one of the threads was on...
Separate names with a comma.