The Jalopy Journal
I know you guys are out there.................
OHV Miller setup with 97s I have messed around with jets and power valves and currently run 42s and 69 p valves. Still running on the rich side?
Runs decent. I'm still playing around with jetting and power valves. 42's and 67 power valves its still rich.
Negative, I was referring to a new Steve Serr (repo) vs an old setup.
Its a new miller set up. Valve cover was not machined to fit around head studs/nuts. Had to take .012 off head to get it flat. It was milled with...
Here's one of mine. [ATTACH]
Thought I would start a thread to "maybe" start a fire under my ass and get it done. Bought a 31 a few yrs ago, patched up the usual places and...
Good running 8ba Needs brake work. Not a rust bucket but does have bubbles in rockers, bad spot in lower front fenders. 540-875-9991
Bump
Very restorable car. Runs and drives, will need brake work to stop. Clear title 540-875-9991
I've read till my eye balls hurt, but a lot of talk about old set-ups is what I keep coming across.
My ohv miller conversion came in the big brown truck today and have searched for a thread on installation. It all seems straight forward but would...
[ATTACH] I am listing for a buddy who is in the first stages of dementia. He has had the car for 20+ years. Very straight rust free car, runs...
Mag has been removed,12 volt coils, 6 volt sarting, no gen or lights, rebuilt motor except babbits (they were fine). Trans, rear gone thru,...
I've got a 41 chevy, 6 on 5 1/2 bolt pattern. I knew rims were going to be hard to find if you could find any at all (I can't). But all the 16"...
I thought I had found a intake I could use but yet again no dice! Two issues, one is that the slot for the gen on the intake is 3/16 larger than...
Its time for exhaust on my 35, I know what smitty's sound like on one but there's alot of mufflers out there. Any body running something else?
Ever happen to any body else. I was putting a couple of tools away off my cart and she started to come after me. I am careful not to open too many...
Wired my 35 the other day but the ampmeter goes to discharge when rpm increase. The cutout is working, I removed the cover and with the out put...
I wired it up with macs diagram as well as vanpelts diagram (stock 6v pos ground, but what is the process for changing from pos to neg groung and...
:confused:Got my 35 ford wired with a harness from Mac's. Something aint right. Starts, runs, beep's, and shine's, but I cant hook up my cut out...
Long, skinny, open and fun. Here is a pic of my bob-tail. Might give you a idea or two.
Separate names with a comma.