The Jalopy Journal
I really appreciate you showing me a picture of your panel... That makes the most sense of anything I've seen. (Plus it will make it easier than...
Your inner structure panel doesn't seem to have the large hook or tang mine does in the center near the top... (At least that I can see...) Maybe...
There are also holes along the top of the header panel for screws, but no corresponding holes in the body header frame that match... Does my panel...
There is a hook in the center at the top of the body that I assume hooks to the foward headliner bow? Also, does the headliner continue across the...
Trying to figure out how the front header panel in the front of the roof works... When I got the car, it was a collection of parts a gentleman had...
Yea, there is part of what looks like a frame for a shelf, although it looks like it kind of goes downhill... Did the headliner go down to that...
[ATTACH] [ATTACH]
Starting to finish out the floor and am going to make a solid rear firewall on my 37 Ford business coupe.. it was bare when I got it and the floor...
I really like the bushing and pivot joint in the '37 Ford brake pedal that I'm looking to modify (no real wear after all these years), just not...
I can easily buy one, but I like to make my own and customize what I need... (I have more tools and time than money...)
Not only for this pivot, but for all kinds of pivots and bellcranks...
[ATTACH]
Making a 90 degree brake bracket, but need to make the pivot for the bell crank... Picked up some bronze bushings, some grade 8 bolts, etc., but...
Digging up an old thread, but just found this... https://shop4seats.com/van-seats/captain-chairs/jump-seat.html Hope it can help, widths up to...
I have a stock seat for a 1937 ford... The springs are in decent shape and the frame and adjusters are good. Could be reupolstered and used or...
Bump
SOLD... 1937 Ford Front suspension... Uncut wishbone in great shape, and axle seems perfect... Crossmember in good shape, not cut. PM me for more...
Here you go... http://www.how-to-build-hotrods.com/turn-signals.html Read all the way to the bottom to see how to do it with toggle switches. It...
Here ya go... http://www.how-to-build-hotrods.com/6v-to-12v.html
Me and my wife were driving back from Florida in a non-forum Mercury Sable. We had gotten into a sea of traffic in the middle of Atlanta 47 lanes...
Here you go: http://www.how-to-build-hotrods.com/c-notch.html And if you want to go more extreme:...
Check this page out: http://www.how-to-build-hotrods.com/fuse-panel.html
Here you go, read this: http://www.how-to-build-hotrods.com/electric-fuel-pump.html It has all the info on how to do your electric fuel pump...
Try this, and then read the rest of the articles in the series... http://www.how-to-build-hotrods.com/how-to-do-bodywork.html
I once was running some used tires on a '47 chevy I had built. The fronts were Michelins (not old, but not new) and I took them off when I was...
I think I would just walk around with it on... People would look at me like an idiot, until they got close and it would be: "Wow, look at the...
I've got a craftsman 1/2" x 9/16" combo wrench that has ridden with me for I don't know how many years... It road on the dash of my truck for I...
This type of wiring should let you start it. However, before you try to turn it over, read this:...
My dad would do the same thing to his '62 Chevy 3/4 ton truck. The inline 6 in it would start running rough, smoke, or start to get tired and he...
Separate names with a comma.
The Jalopy Journal
