The Jalopy Journal
Hey guys I was doing a transmission swap on my 56 medalist and turns out it had a flat head throw out bearing not a y block, and it was contacting...
Ok guy so in been going to the shades of the past car show for over 10 years now, for one reason or another iv never had an old car of my own out...
Hey guys I recently started driving my 56 merc around and I'm have a problem out of the left front brakes. After driving it for about 15-20 mins...
Hey guys I'm swapping the carb on my 56 merc. Of course I need to ditch the load-a-matic distributor. I was just going to use a 57 distributor but...
Ok so just a quick question. I'm currently working on a 56 mercury, 312, 3 speed on the column. I'm looking to changin the rearend ratio because...
Ok so I rewired the front on my 56 mercury headlights, turn signals, ect. I used a harness that was made for my car, the only part I made myself...
Ok guys I'm in the middle of rebuilding my carb on my mercury. Iv ran into a problem. The pump discharge needle seems to be stuck in there. Also...
Hey guys just ended up getting a good deal on a 56 merc. I traded a 69 Torino fast back for it. I had no use for the Torino so I see the merc as a...
Hey guys I'm looking to upgrade the carb on my 60 Pontiac. I got a 389, from what I can tell looks to have heads and intake from a 400 on it, with...
Ok guys I installed a new ccp master cylinder on my 60 Pontiac. The front disc brakes are working well. I'm getting no fluid going to the rear. I...
Ok I just spent the whole day driving around tring to figure this out but I know you guys on here will know what to do. I got a new master...
Ok guys I'm working one the brake lines on the rear end of my 60 ponitac, the rear end is a 8.8 out of and explorer. I got the hard lines all...
Ok guys just got my Pontiac running after 5 years! I'm so excited to get it back to being drivable now. But when I release the clutch in neutral...
Hey guys I got yet another question about the suspension on my 60 Pontiac. I got a ladder bar setup under it now and used a set of coil overs that...
Hey guys I'm working on the front end of my 60 Pontiac Ventura. Does anyone know what parts if any will swap from and impala? I wanna use lowering...
Ok these may be a little newer then you guys deal with. I got from a guy at me shop he was just throwing them out. They are from and chevy truck...
Hey guys I'll be there next weekend I'm sure I'm not the only hamber that will be there. Who's going Ryan
Hey guys! I'm Ryan for out here in Burlington nc. I'm 26 years old and have wayyyy too many cars! Haha I have a 35buick, 52 merc, 60 Pontiac, a...
Ok guys. Im Ryan, Here is my current project, it's a 1960 Pontiac Ventura 389 4speed Saginaw. The story about this car is I bought it for a daily...
Separate names with a comma.