The Jalopy Journal
Some mention blocking off the power valves? If I use two on a Hexagon intake what would be the procedure for blocking and would that have an...
[ATTACH]
Someday I will get this done!
The 28 ford powerhouse gen housing I used looks authentic, Regarding alternator /.generator the Kubota is a PMG a permanent magnet generator it...
Interesting topic
I used a smaller one It is a 28 Model A Powerhouse Gen with a Kubota PMG fitted inside, Put out about 25 amps Some photos of it on my blog...
got any more photos of the T touring? I have one like that Nice.
I made aa alignment tool and a couple of old bearings and it turned out well. OK for a mild flathead I would do it at least give it a try What...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
[ATTACH]49 Plymouth bumpers look good on these 1/2 tons need a little massage but work out well.
Slow but sure.[ATTACH] [ATTACH] coming together
Polish the stock ones, A lot less money and they look good[ATTACH]
I had one like this years ago, since we moved to a new area I am not sure how this would go now! Maybe I can do it on the lot line and folks will...
Yes But only the case. I installed a PMG permanent magnet generator from a Kabota in it. It puts out about 25/28 amps and is enough for my use. 12...
I Used some on mine. 36 flat top. Polished and look great. Still not much over 85 HP with the old Roof intake and a ,couple of 81s but work great.
I see a 35/36 rear radius rod look around and you may find the mate. These are worth something in todays market. Good luck. Thomas
Thanks Do you have a p/n for those bearings?
Hello After 28 years the old 201 in the hot rod needs some help. It was repaired years ago and now need a little bit of help. You mention a...
That is an early 201,Notice the cast in square block at the rear on the side,Early ones had that. Maybe a tooling spot for holding when machining....
I used a 28 Model A Powerhouse Gen and put a Kabota PMG inside. Puts out 25 amps and that is enough for my needs.Gives me room for two carbs on...
Those 49 style are rare as hell! Only made for a few months in 49. I have a set on my hot Rod Early style 36 and prior. Slowly coming together.Not...
Looks like a Blackie Green axle. I bought one mid 60s for my 40 coupe. From Dickinson Dunn in Victoria
I must have signed on early,Always though lots were signed on? Anyway He has lots of well thought out comments and I hope he gets lots of...
[ATTACH] [ATTACH] Photos From the summer. Flathead is starting to make some noise! And not exhaust noise! Maybe time for some help this winter.
Heres mine,very early Roof manifold and a powerhouse gen with an 25 amp alt inside.
[ATTACH] [ATTACH] This just a couple of walls! Never mind whats on the floor![ATTACH] [ATTACH] [ATTACH]
When we lived in Invercargill we would race out at Oreti Beach! That was 40 years ago. We had a Sikorsky S61 and were supporting an oil rig in the...
Hello. Anyone checked out "ROMO Denmark Beach Race 2019" Happening right now,look it up. Also The Normandy Beach Race near the Belgium border...
[ATTACH] Here I am at Deuce Day, Looks like I,m camping on the Legislature grass. It was a nice spot and some shade! Over flow parking behind the...
Heres Mine .Happy Canada Day[ATTACH] [ATTACH] !
Separate names with a comma.
The Jalopy Journal
