The Jalopy Journal
I am planning to use various engines which I already have build. First with the 36 HP class and go to El Mirage and see how it will perform than...
Thank You to all of you for been so positive with me to build this tank with a VW running gear. This weekend we are planning to buy the tubing for...
I did measure my tank and the lenght is 128 inches long from tip to tip. Frenchy
This particular tank is from a P38 a friend of mine had it in his back yard and told him if he wanted to sell it to let me know so I was lucky to...
Richard I cut the above the seam with a die grinder I was going and use my plasma cutter but I wanted a nice clean cut and it took me a few...
Man I am stoke all these positive feedback on my project Thank You everyone. I have many good ideas for this one. No fan housing but I will be...
So far Thank You for the great feedback. I will start with a 36 HP motor going to El Mirage and after build a 2165cc or 2332cc with 48 IDA...
Thank You ! just past history. This one will be cool I already have the engine ,trans,front beam etc ... Thanks Frenchy
I did get a lot of various reactions when I had it out the first day making a dolly for it some of the comments why do you have a bomb or why do...
Beside working on my 1931 Track T Roadster I knew I needed another project. I bought this tank from a good friend as you can see in the pictures...
This down draft tube is from a later Ford and had a steel wedge made to weld to the side of the oil pan works well. Frenchy
Give me a call when you have time and I can help you. Frenchy 1 800 764-0406
When you separate the two half do you cut the one half where there is no lip and make a lip for the other half is this how I have to do it....
Mike I was lucky that the firewall on the Denver Deuce has a recess so the engine could be set back. The frame are from American stamping. I had...
Great job will keep my eyes on your project. Frenchy
Here a few pictures of my Roadster with V12 stock lenght 32 chassis no problems. If you need more pictures let me know. Frenchy
This is what I have installed on my flathead V12 a down draft tube for ventilation and it is working well. Frenchy
Thank You !!!!! Frenchy
Looking great I will keep checking on your project. Frenchy
Here are pictures of my 32. Frenchy
Doug Lindow in California near Los Alamitos did my axle housing some years back and told me the reason why some of them were bend is because when...
If this is the same Doug I know he has a shop in Los Alamitos and he did my rear axle housing some years back and had a couple of Hot Rods in his...
Great build nice job keeping my eyes on your project. Frenchy
A few updates the firewall is done also installed the Beehive oil filter I will have to modify the bracket so the filter is level because of the...
I f you want to see a 38 / 39 Zephyr transmission check out my website at frenchysrides.com and click on the 32 roadster and you will see a few...
Nice project I am subscribing to this one. Frenchy
I did accomplish a lot these past few days the firewall was the main area I wanted to get done and was able to fit the steering column as well. I...
Made some progress on the 31 project yesterday. We made our firewall from various other firewall to fit because originally the body was narrowed 6...
Thanks for the heads up I figure they are a vendor here on the Hamb and I did not think I would of had issues. Frenchy
Well put together love the stance. I like where you mounted the oil filter. Thanks Frenchy
Separate names with a comma.