The Jalopy Journal
Try Wheelsmith. Very good to work with. Sent from my iPad using H.A.M.B.
Any suggestions on a good reasonable tracking device. Sent from my iPad using H.A.M.B.
I’ve used American Autowire three times. I wouldn’t consider anything else. Sent from my iPad using H.A.M.B.
I’ve used Custom Auto Radiator out of N.J. on both a ‘29 Roadster and a ‘36 Roadster with wonderful results. I’ve also had two radiators from...
I’ve used Cam Shield for years. Goggle it. Good stuff! Sent from my iPhone using The H.A.M.B. mobile app
Chassis Engineering if you can find a set. Sent from my iPhone using The H.A.M.B. mobile app
Danny: Al and Ken are planning on being there. You staying at the same place? Sent from my iPhone using The H.A.M.B. mobile app
Happy Anniversary! See you in June. Sent from my iPhone using H.A.M.B.
I chased an intermittent mis on a sbc for over a year. Finally changed the whole distributor and it was gone. It was grounding out down inside...
I recently tried White Diamond (Advanced Auto) and am very happy with it. Sent from my iPhone using The H.A.M.B. mobile app
HRP....Not sure which car for Knoxville. Driving the roadster down for the All Deuce Run for sure. Sent from my iPhone using The H.A.M.B....
HRP....Al and Ken will be there. You parking on top of the hill again? Sent from my iPhone using The H.A.M.B. mobile app
I have to agree with a couple of you old timers. Memphis Nats '71 and Gatlinburg (Gillette Motel) starting about '72. Sent from my iPhone using...
There used to be a guy in Michigan that made an underdash shifter for 350 turbo's. I have one on my '32 and it works well. I'd have to find my...
I used a S-10 split back bench in a '36 Roadster that I built in the late 90's. A lot more comfortable than you would think. Had to cut and pull...
I built a '36 Ford roadster in the late 90's and used a Chassis Engineering 4 bar system. Allowed the front to sit lower than the Chassis...
I know this sounds stupid HRP, but have you looked on the back floor of the sedan? Sent from my iPhone using The H.A.M.B. mobile app
Patina33: I have pictures of why you don't want to remember anything. [emoji6]. Tits and wieners at the Gillette! Sent from my iPhone using...
I have the same Craftsman gun as Relic Stew. Painted several cars with it in late '70's. Lacquer of course. Did a pretty decent job. Sent from...
Stock on modified stands on a full fender car. '39 Ford on highboys. Sent from my iPhone using The H.A.M.B. mobile app
[ATTACH] Here's my '51 Chevy.
Stan, There's a social forum on here for these wagons and deliveries. Some good info on it but not much action lately.
I used a mid to late 70's Granada 8" rear on a '36 Roadster. Was very happy with it.
GM made several different pitman arms. Most had a drop to them. Either change pitman arm or heat and bend your pitman arm. If you heat and...
Tune a carb! Please tell us how to set the off idle air/fuel mixture on a car that does not have an O2 sensor.
P
[ATTACH] 1912 Maxwell Messinger. 2 cylinder. Good original interior. Same owner since mid 50's. Engine turns. Good Ohio title. (513-604-5672)
[ATTACH] [IMG]
Can you change the exhaust? The stance is KILLER!
Separate names with a comma.
The Jalopy Journal
