The Jalopy Journal
I've got a 36 Ford 3 window coupe that I'm in the process of putting back together. I'm running a pepped up 350 sbc and 700R4 tranny. The radiator...
Rebel wiring made me a very nice 21 underseat harness for my 36 Coupe. I've got the wiring laid out to where it goes. Dash is wired and...
The 37 Ford Pickup on my profile pic has a Rebel harness in it. I've recently purchased a 1936 Ford 3 window coupe that I'm in the process of...
I've got a 36 Ford 3 window coupe that I'm putting a Fatman rolling chassis under. what's the best way to figure out the shimming of the body to...
I've replaced the floor pans in my 1936 Ford 3 window coupe. I've purchased 3m seam sealer to seal her up. What's a good product to put on the...
the paint job looked so good I thought to my self someone has done a fantastic job on this car.. no need to look any further. sold!! lol....
I purchased this beautiful 3 window coupe a few weeks back. I've never bought a "turn key" hotrod. I've always bought projects that needed built....
don't reckon I've paid any attention to the 32 grill shells being chopped or lowered. would love to see some pictures of this.
I've been working on our 29 Tudor. Top's lowered 3.5". Not planning on channeling it. It's sitting on a 32 southern cal rolling chassis. Not...
I've been told there's a company that makes good aftermarket bench seats for a 36 Ford coupe but the guy couldn't remember the companies name. Any...
I purchased this 36 coupe over the weekend. Paid more than I wanted to for a project but they don't come up too often around SC. It's in really...
I picked up a 29 Ford Tudor to piddle with. It's all steel body sitting on a supposedly SO-CAL rolling chassis, fresh built 355 and 350 turbo. I...
can you send me the info of the kit please. thanks
Guys, I've got a 327 and 350 turbo in my 37 Ford pickup with a 373 posi rearend. I've purchased a 700R4 transmission to swap out with the 350...
My setup is a 327 SBC with a M20 transmission and hurst shifter on it. It's been mated together for roughly 10 years, maybe 4000 miles on it. It's...
Has anyone got an explorer 8.8 rearend that easily accessible to take me a measurement? I have this piece in the lathe at work and hate to take it...
got a couple of questions about an 8.8 Ford rearend. 1. is the bolt circle on the rearend of a 89 mustang 8.8 the same as an 89 explorer... is...
I have a 37 Ford pickup that's finally together and on the road. All steel body. Needing suggestions of brackets used to hold both hood sides up...
6800.. needs a home. call 864-616-2136
I pulled the flexplate back out last night. turned it around to where the raided lip and convertor mounting pads were toward the transmission....
the last time I installed the flex plate I turned the recessed side toward the crank shaft. this flexplate had no pads where the convertor bolted....
I've got a 327 engine connected to a 350 turbo transmission. my original 153 tooth flexplate was flat. the new flexplate I bought has raised...
I'm running a 327 with a 3 deuce Rochester G's and a 350 turbo transmission in my 37 Ford Pickup. I need some help on how to set the adjustment on...
I've got a 37 Ford pickup with a 350 turbo and a SBC 327 with a 3 duece setup on it. What kind of bracket do I need to connect the kick down cable...
I'm needing some help on hooking up the vacuum lines on my 327 SBC. My setup is a vintage tri-power edelbrock intake and Rochester carbs (2g) I...
Thanks for all the advise. A local friend of mine that's restored wooden boats for 40+ years turned me on to a product called "West Marine"...
I'm working on my 37 Ford Pickup and am ready to stain and seal the red oak planks for the bed. I've fitted everything, still gotta sand the wood,...
I have a 37 Ford pickup that I'm putting the original style headliner in. I have it in the truck and screwed across the front header bow.. the...
bump
I'm to the point of putting my glass in my 37 Ford. Would love some good pointers in completing this task. I have the window regulator assembly...
Separate names with a comma.