The Jalopy Journal
I have used the 12 circuit twice and both were installed and running in around 4 hours. Fairly simple. Well labeled and easy to follow...
Here's a pic or two of my 55. It's my daily for now till I get my 67 runnin then the 55 is being torn down and rotisserie'd and at the risk of...
I cannot remember which year for sure somewhere from 55-59 I seem to recall having 12v in an old 56 dodge truck i had that wasn't a conversion but...
i wanna say 72. My 67 has em but my buddies 73 was stock 5 and I cant find any 6-lug parts for his at all that aren't aftermarket.
Learned a ton from this thread and I'm about to tackle the floor pans on my 55 wagon so I really appreciate the info. Gotta say though, all this...
Now if the pontiac is a canadian built pontiac it would have the chevy rear end and eaton would have a bolt in posi for it for around 600 they may...
Ended up some how the harmonic balancer was screwed and was cutting into the timing cover.
I forgot to mention, with the water pump pulley disconnected the noise isn't quite as loud but is most definitely coming form below the pump and...
you know it's close enough to where the noise is that that very well could be it too. I will check that as well.
warmed up its MUCH louder and more constant. I'm gonna borrow a steth tomorrow hopefully it wont be too bad.
So sorry in all the frustration I forgot to mention it all. Chevy 350 mechanical pump 30 over hei non power steering stock cam
here we go this is with is cold you can hear the loud tick when i rev it. I tried the screwdriver at the valve covers to make sure it wasn't a...
no power steering still strong arm. disconnected the belt from the water pump and the noise is still there. I uploaded a video to youtube and i'm...
definitely not a wheel. happens with the car standing still at idle in my driveway it's not an exhaust leak as I originally thought. It's...
So I was driving my 55 today since it's my daily i come to a stop and I hear this crazy scratch noise. it stops as I start moving again so I...
Thanks for the info guys found all I was looking for.
No worries I run a few message boards and totally understand and appreciate the info and meant no disrespect to anyone here. YOu all pretty much...
Thank you both for your replies I will look into the 70s truck you mentioned ex and as far the truck being a little new for this board 57 you're...
Was gonna be my suggestion have helped friends with this on their 40's chevy's faily simple install and works just fine.
Hey guys, I have 2 projects going at once and this one is kind of throwing me in circles. I need some sheet metal for my c10, rear fenders to be...
Bolting would work as well only reason they suggested rivets was in our experience with all sorts of aluminum in aero structures it holds up the...
Already been discussing it with the guys and Rex Schimmer is right on the issue of when you weld it the 0 condition which we just call ought is...
Saw some of you boys up at Pistons & Paint. What an AWESOME! show
I would love to contribute. I have TONS of stock 265 chevy parts. Original valve covers, Oil Tank that bolts on the intake also have the intake...
Thanks for the warm welcome
If you're still researching this and can give me some dimensions and specs on rail sizes and lengths and a basic draft of what your end product...
Great show this year. Me and my Buddy were out there pinstriping. Can't wait to go again, there were TONS of awesome rides.
I've used it on my cars and bikes. Seems to get junk out of the fuel system pretty well. Saved me a few times too.
Separate names with a comma.
The Jalopy Journal
