The Jalopy Journal
What is the exact mounting you need for both ends? Im guessing a bushing and sleeve top and bottom but what size I.D. does the sleeve need to have...
here is a little more transitioned "Z"
If thats the style of battery you want you should check out the Orbital made by Exide. Much better battery plus its all black, just pull decals...
At 200 psi i wanted the rear valves away from the bags especially for an older guy, plus i was able to keep my ridepro air sending unit wiring...
This is a car I did the air suspension on a while back. It sits pretty good to have used all factory suspension although I wished i could've got...
Anybody know the actual color that was used on the adonis or was it mixed for that car???
Another way to avoid running two plates is to find a dealer plate for that year of vehicle and you dont have to be a dealer to register a dealer...
The work and detail on that car is incredible. In the pictures is the car all the way down or was that just the height for the pictures. I just...
I just looked at your car and somebody could've added a rear seat but I believe that is a club coupe. I have a 53 chevrolet club coupe. Thats a...
Yeah you can go that route. With the dropped uprights and steering arms to compensate it works pretty good without having to use a MII. Use a...
The bag in the thread is a 2600lb contitech. but any 2600lb bag would work fine as long as you have room without rubbing. just make sure that when...
Let me know what you are looking for help for as far as suspension goes... thank you Aron Summers
Let me know what vehicle you have and I can help you set it up to work with the space that you have....
I hate sanding too!!! Well good luck.... getting a whole car ready for paint is so overwhelming(spelling?) to me! Good luck with the process.
Very neat car. What is that aircleaner from??? Does anybody know?
Actually a paralell four link with the upper and lower bars being the same length doesnt change the pinion angle, while a triangulated four...
Yeah I just cant find anybody around here thats why I thought Id ask on here because the majority of people I ask dont even know what they are.
Does anybody know where to get a set of spider caps in the dallas fort worth area so I can just go pick them up, I need them for the weekend and...
My 54 project [IMG]
Yes in that picture I had just swapped the spindles and flipped them over but it threw the geometry off way too much and wouldnt steer right. It...
Yeah there is enough movement in that front joint. This car had the torque tube still. [IMG]
The doors were alot easier than I thought, I just measured over and over and made sure my kuts were precise and they went back together perfectly....
I will probably pie the deck lid but I dont know about the hood, looking at it from the side I dont think the hood would follow the same line as...
Separate names with a comma.