The Jalopy Journal
thanks
so did you ever get this done any pictures of it as work was done
this is 2 gallons of school bus yellow that got 2 qts of a white mixed in 2.5 gallons total
well, this is a large test panel lol. not sure about the yellow possibly if the window area was all green it would be better. it defiantly would...
I did not like the sharp edge on the wheel well so bent some tubing and split it in half to make a bead . Took several hr to weld each side but it...
I keep chugging along when I can find the time for my stuff. ising a 64-7 mustang tank not my first choice but there cheep. [ATTACH] [ATTACH]...
can someone measure the distance from the rear of the tank to the center of there axel housing ?
i may still have a set i purchased 2 sets years ago and 1 set on my a
i had some fender well exit headers made for a pickup .see in my avatar. and they look good stuck out a little farther then I liked. and lets...
[IMG] The gear box and steering linkage is done. Few more day it’s all coming apart for finish work Sent from my iPhone using H.A.M.B.
[IMG][IMG][IMG][IMG] Everything is a fight at this point working on the steer column Sent from my iPhone using H.A.M.B.
[ATTACH][ATTACH][ATTACH] Tires sure make a difference [ATTACH][ATTACH] 3 lever shifter 1 lever 1&reverse 2 lever 2&3 3 lever overdrive
[IMG]need to find a match to this seat I think Chevy van middle seat. It fits and more importantly I fit comfortably. Will do a little reshaping...
[IMG][IMG] There were a bunch of changes done away with the 2x4 rails and use 32 rails instead [IMG][IMG] It was a lot more work but it look...
[IMG][IMG][IMG] I could not find the rims I wanted 4.5”x15” 5on5 lug pattern so I took a set of 6” wide and cut them down. [IMG] Changed from...
It is a longer wheel base I believe 5". But used a stock Lenght 32 rails. The yblock and 3speed overdrive fit on a stock length but had some...
[ATTACH] Do these headlights look high? I am thinking they Should they come down 2”[ATTACH]
[IMG]the hemi is in my 63 f100 Sent from my iPhone using H.A.M.B.
[IMG][IMG][IMG][IMG][IMG]some things have changed it’s getting a Y-Block with Manuel 3 speed overdrive but it still getting done. You can see all...
there is a lot more pictures posted on facebook at river oaks gear head all my projects are posted there and what we do each day. i have a hard...
[ATTACH]this chevy Sent from my iPhone using H.A.M.B.
[ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH] It’s coming along I just keep getting side tracked. Still shooting for...
I will wright it down thanks.
Oldsman. I usley do not paint in the summer so the additive I have (4qt) for the chromaclear is mide temp good to 85deg. I do have some nason...
Looking for a substitute for dupont 7995s activator chromaclear clear. Is there a nason activator/reducer that will work?[ATTACH]
Edsel had push button shift right on the steering wheel.
Yes it's a hot heads aluminum timing cover and the cam was an erson grind made for 1956 and up 354
its got lots of nice parts in it the man I got it from had $8000 in receipts for parts and machine work just need to be put together $2000 well...
it point up just like the factory did. I felt lucky I got the intake 2 years ago and it was $524 for the 2x4 it was in very good cond. I have see...
My biggest grip with the early 331 is intake selection and cost. [ATTACH] If you run the coman ones like this hot heads intake then you have to...
Separate names with a comma.