The Jalopy Journal
I see that FMSI now has straight and 90 degree repair lines available with the special flare....
Get an easy to read digital angle finder like the one at HF. I use mine all the time. http://www.harborfreight.com/digital-angle-gauge-95998.html
A 2 link can also be ladder bars(too stiff for street as it turn the rear axle housing into a large anti sway bar). With a 2 link suspension the...
NHRA rules call for 1 3/4" tubing with a minimum wall thickness of .118". This means you need .134" mild steel tubing to allow for it getting...
If one side is 3" longer than the other, I'd cut 2.06" off the housing on the long side which would center the housing when viewed from the rear....
So which insurance companies won't insure a car with a roll cage?
When using compressed air to remove a stuck caliper piston, it is best to not do it near a fresh paint job. A pressurized gas tank is not a good...
You could save a few dollars by buying this kit and welding it yourself. http://swagoffroad.com/20_Ton_Press_Brake.html
56 Chevy 210 2 door sedan with a 1953 Chevy truck 6 cyl engine and a 3 speed transmission. I put a Hurst shifter in it and numerous sets of synchos.
If you are starting from scratch, then some detailed drawings of what you want to end up with are useful for clarifying what you need. Your list...
Post count is meaningless. With used intake manifolds you have to be aware of the possibility of it having been cut for ports to match up with...
My name is Kevin and I'm trying to make the transition from years of drag race only cars to a streetable vehicle that looks vintage and still goes...
Separate names with a comma.