The Jalopy Journal
Thanks for all the advice and the video was badass.
Car going to be for car show and maybe go to the strip
I have a 318 30 over with a 292 duration with a 508 lift and has 360 heads on it. The car that it's going in will have 8 3/4 rear it with a sure...
Thinking about changing the rear suspension to a four link and coil over set up and eliminating the rear leaf springs but, not sure if that would...
[ATTACH] Today I had the frame sand blasted.
[ATTACH][ATTACH][ATTACH] I decided to take the body off the fame to paint the frame. I am also going to fix the floor and put new inner and outer...
Yesterday I worked on the Plymouth. I peeled off all the old heat and sound deadener in the trunk and only found two holes in the trunk that need...
[ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH]
Quick update. I been slowly working on the Plymouth but don't have a lot of money so just been doing what I can. I have decided to use a...
It's a 74 Plymouth duster subframe with power disk brakes and I am doing all the bodywork my self and not using a body shop
In one of the pictures of the dash it shows four holes that I'm going to weld shut because the to bigger holes were for the head light switches....
I started working on the dash and found some rust holes. I also decided to eliminate the glove box, so I made a cover for the glove box hole and...
thanks for the input. I went and bought a 30in and it look good
I got a 28 inch steering column and was wondering if I could use it in my 37 plymouth coupe the one that was in it was kinda home made and didnt...
Quick up date, I have got the motor broke in and I have taken the dash out and now getting ready to pull motor and tranny out to final prep and...
Worked on the Plymouth today got the water leak fixed it was coming out of the front and rear header bolt, so i put studs in them and ran the...
I got the motor all put back together and was getting ready to fire the engine and found that both of the heads are leaking coolant by cylinder 7...
Update, had a big fuel issue with the motor and figured out that the mechanical fuel pump was not pumping. I took the pump off and found that the...
Thanks Posted using the Full Custom H.A.M.B. App!
Where are they located and do they have a website? Posted using the Full Custom H.A.M.B. App!
I was wondering if anyone knew of a guy or place that restore gauges at a reasonable price because my 37 Plymouth coupe gauges and here is a...
Sorry for not having any updates on the 37 lately because i am getting married in two weeks so been focusing on that but as soon as thats all dne...
This is what i have done with the firewall. I had to make a small cubby hole for the distributor. The starter relay is mounted on the firewall and...
updated photos of 318 motor with new firewall.
how bad is your tail pan and it wasnt to bad to make.
A quick update. I fired the motor the other day and it ran great. Just finishing mocking things up before I pull the motor and trans put to paint...
wheres the best place to find a stall converter for 727 thats 2800-3000 for a reasonable price?
I have hugger headers on the motor. Thanks for all the info.
my 318 has flat top pistons with new rings and rod bearings and im using the car to take to car shows and cruise around town and maybe take it to...
wish i had the money to buy a kit, but all the ones i find are around 600 and up and i already have a painless fuse block.
Separate names with a comma.