The Jalopy Journal
Purchased a rebuilt transmission turbo400 and it looks like something should be covering this?
the engine is offset at an inch to the passenger side. I'll take a look at Fatman.
I have a 48 Desoto, I have swapped in a 318 (tight squeeze) For power steering- is there a steering box that can be swapped to retain most of the...
Just bought yesterday. looking for engine options for more interstate friendly cruising
cool! sounds like what I need. Will give it a try. Do you know what you thinned it with?
I am restoring a porcelain sign and wondering if anyone had some experience in this arena. I have the areas that were damaged fixed and leveled...
That would be awesome!
love the build project! I am looking to do a FED sooner than later. what type of tube diameters are you using and type of steel? how is the tube...
Uploaded better pics of the woody. I believe it is the 88 Futuramic Wagon
I just joined the 1950 oldsmobile woodie wagon club. Bought one at auction today. its rough, not gonna lie, but the price was right. Anyone have...
I'd love to get a patch from town talk!
Looking for a someone who can layout some graphics on a trunk as a gift for my neice. Lansing, MI area.
Great info guys. any pictures of the gas pumps, globes, signage? I found a 5 gallon, ice scraper, a couple glass quart oil bottles. No pictures of...
not a forum that likes rats?
alright, I see that I have started a holley vs. edelbrock carb thread...
good tension is on the return spring. I have a dual spring setup. the gas pedal does take a bit to push. It is a rat rod truck, 350-v8, crane...
it seems to be flooding out the truck. with the fuel pump running and psi at 5, fuel drips pretty steady out of the 2 marked areas in the photo....
I have an old edelbrock 650 manual choke sitting on a edlebrock performer dual plane manifold. the carb is leaking badly from various places. I'd...
correct FJ it is leaking from the reservoir. the lower bolt I put in did not seal it, and when I look online there are saginaw pump reservoir that...
I sourced a power steering pump from a swap meet, it was a rebuilt model. There were 2 red plugs on the back of the power steering pump I...
I have seen this in magazine and probably online, but I can;t for the life of me find it or remmeber exactly what it was called. It is a 3M...
I think that is exactly what has happened.
I rebuilt the bottom end, has brand new rings. The top end looked decent and money just didn't allow me to get all of that done. After the bottom...
does it matter which cyl. you start at with that method or if engine is on compression stroke or not? When you say no lash, you mean no up/down...
I have the stock 882 heads with an rv cam sbc. the head on the passenger side is failing and soaking plugs in oil and producing a nice blue fog...
would the popping be lean or rich? I'll fiddle with the distributor a couple degrees each way to see if anything changes. The problem occurs no...
thanks for the advice, I was at a car show yesterday and saw tons of edelbrock and was thinking... there is no way this many are used and not able...
got a question on my 4 barrel Edelbrock carb. I have a stock 350, cam, turbo 350 trans, 2200 stall. I don;t have a kickdown cable installed (not...
Joe if you do get any pics and wouldn't mind sharing them with me, that would be AWESOME!
Tomorrow is the day!
Separate names with a comma.
The Jalopy Journal
