The Jalopy Journal
Does anyone know of a good "decent" striper in the Berdoo area? I occasionally have people asking me if i know any.
Putting all that pressure on shock mounts in not that good with an air shock. Just change your shock to a better type.
Now just to add in to what I just noticed... The supplied heim-joints are 1/4-28 with jam nuts and the threaded rod is 6-1.0 mm.... that just...
Head east ob I80... go to Bonneville.
I just installed a second shifter. Two different vehicles. The first one went well, now for the second one.... HAHAHA... I didn't know that I had...
Truck arm style. I just did an install in a '54 using Jimenez Bros. kit slightly modified.
I was supped to be going.... ugg... work wont allow it right now. I usualy crew for the EZ-Hook streamliner.
I'm trying to install these "bellows","door to hinge gaskets". Does anyone have any pics or knowledge of how these things attach to the door?
Like Atwater Mike said, the lever type. The part number is either SLS-40 or SLS-43. Both bolt to the under side of the floor with 10-32 screws....
Check converter bolts
Not all push buttons have two polls. The single poll type basically connects ground. If you are going to use any type of start button I highly...
Check this place out.. <table border="0" width="800"> <tbody><tr> <td> [IMG]</td> </tr> </tbody></table> <table border="0"...
I had the same exact thing happen to me with the pertronix. What had happened was the pick up under the rotor has magnets in it with a green tape...
This is the coolest sound. [IMG] http://www.youtube.com/watch?v=UqO6msKE4G4&feature=player_detailpage
This is a good sound. The Burkland streamliner at Bonniville doing 450 [IMG] http://www.youtube.com/watch?v=UqO6msKE4G4&feature=player_detailpage
That is the sacrifice of a modified stock front end. Set it at ride height and align it there. Other wise you have to go to an aftermarket...
Check the surface where the washer seals, make sure that it does not have any nicks or dings in it. On both hose end and wheel cyl. You also said...
Check the depth of the wheel cyl. compared to the end of the hose. I have ran into the threads of the hose being too long for the wheel cyl. On...
Have the alignment checked. Also, check the box if its too tight. What size are your front tires? Is it lowered? Stock front end?
I did a lot research on this about 10 yrs ago. I ran into the same issue with a Volarie witha big block ford in it. Anyway long story short. Early...
http://www.jalopyjournal.com/forum/album.php?albumid=26964&pictureid=466916 This was mine. I just sold it
[ATTACH] Here is one. Random pic that I acquired somewhere.
I have also fixed lower brackets like that. It just needs to reinforced in the correct areas to accommodate the power
Calvert has been doing it for a long time. Also with a proven product. Follow his advice.
I grew up at that pick-a-part. Also my shop is about a quarter of a mile fom there. Those cars were never out in the main yard. As far as I knew...
What kind of cam profile do you use or is it the stock cam?
You could flip the main leaf. That should drop you about 2"-2 1/2". Look for a dropped axle. That should get you another 3" or so.
X2. I don't like the whole idea of a vehicles weight relying on shock pins or bolts and bushings. The weight of the vehicle should be on more of a...
I did a set up on Merc with accuair, and hard lined the whole system. It takes 2 weeks for it to leak down. I prefer to hard line because you will...
Separate names with a comma.