The Jalopy Journal
look like bassett wheels, made in Adelaide, 1970's, no longer made, were made of aluminium, not magnesium, I knew the guy that made them.
This is good info, i have 3 different main caps, 2.495, 2.625, 2.850, 2.495 is off of 301 poly i think, 2.850 is off 354 poly block, don't know...
I see you put a tail-shaft loop at the rear, what happens if the front universal joint breaks, where does the front of the shaft go after it digs...
george, you need to check your info, HT-812 lifters fit 361-383-413-392-426 chrysler, this is a sealed power part number, check summit webpage...
Hi hallrods, the 2011 lifters are no good, you need ht-812, the oil groove in the 2011 lifter is in the wrong position, you need the early 361-383...
thank for your info, cheers, i will have to catch up with you next time i am in denver should be around this time next year after the 60th us...
have a look in the kinsler fuel injection handbook on the web, constant flow section, has really good info on running mechanical injection on the...
when running 3/8" adjustable pushrods, if you use high lift cam, you may have to drill pushrod holes to 1/2", i had to drill my heads when using...
need to know center line distance crank to cam early hemi, thank you.
try, clipsandfasteners.com for various grade-8 studs, go to sub heading studs, then exhaust and manifold studs, they have double ended studs for...
just received my ross pistons, real nice, 4" x 1.75 comp hgt, .990 tool steel straight wall pins, 6.800" rod, using them in my blown 354 hemi on...
i have got 2 weiand wc671 manifolds, 1 is genuine weiand manifold with blower hold down hole missing, because it is on top of manifold bolt hole,...
:)just received my new billet solid roller for blown 354 hemi from crower cams
NEW LOW SUPERCHARGER MANIFOLDS NOW AVAILABLE, CHECK WEBPAGE, www.aussiespeed.com THEN GO TO SUPERCHARGERS AND PARTS LINK.
some info for guys running high lift cams, i have found out the hard way, if you run valve lift upwards of 0.550" with adjustable 3/8" pushrods...
Yes i have some pics, if you give me your email i will send them to you, i don't know how to upload on to the hamb, phil
A727, FROM 76 DODGE VAN, B100-200-300 318-360 76 PLYMOUTH VAN, PB100-200-300 318-360 76 RAMCHARGER and...
i am trying this combo, 6.800 bbc scat rod with jahns 1.75 comp height piston, crank turned to 2.2" journal, putting in my 354 hemi, in fed dragster
:) Hi from downunder, has the torque convertor got weights welded to to it? that could be source of vibration, you should balance convertor with...
The hemi 6 block had 2 different gearbox bolt paterns, tf-727 and borg warner 35, the tf 727 was used in cm valiant with 265 engine if i am not...
THE 265 HEMI SIX CAN BE BORED TO 4" AND USE CHEV 350 PISTONS, 275.55 ci, PUT ON A TURBO, MAKES PLENTY OF GRUNT.
hey rooman, congratulations on running the car, phil said you ran 6.3, really stout first time out. phil.t.:cool:
Hey rooman, was you in adelaide when roger wrecked the 'over the belt gang' dragster, that was a bloody big mess, and REMEMBER our very eventful...
i have got 1 of those blower manifolds, bought it at a swapmeet A$500.00, I %$%&&^^ UP,fits my hemi ok, not my poly, found out that 354 hemi truck...
Separate names with a comma.