The Jalopy Journal
[ATTACH] [ATTACH] [ATTACH] Can someone help me ID the year of this 2 jet? The tag is gone and no stamp by the fuel bowl [ATTACH]
I’ll be removing the cab off of my 59 Apache, probably alone. Seen alot of fixtures that seem over engineered. Does anyone see any safety reasons...
I have a 68 250 in with lower end in good shape and an 81 250 with what sounds like a bad main bearing. I'm wanting to keep the 200r4 with OD....
Finally gonna start a 59 Apache that's been sitting for a looong time. I scored a 1968 250 that was put together on my 1st...
Looking for a junk yard swap idea for a foot parking brake. It's for a 50 deluxe that has an open drive line out of a 1998 s10 I believe. Rear end...
For a 1950 Deluxe. I have a 12 circuit fuse box that was bartered for. I also have a bunch of 12awg stranded THHN wire from a home project. Can...
Kids are in college and overtime has ended. Finally have some time for the projects. [ATTACH] Sent from my LGLS991 using The H.A.M.B. mobile app
I ran across a guy today selling a 283/Powerglide cause he swapped a 350/350. Just wondering if anybody has an idea of a fair price. Supposedly it...
Just a few pics of what was there. The Riddler car was there too. These guys put on a great show and it gets bigger every year.
First of all, only by the grace of God am I alright. I'm gonna rehash a safety topic that comes up every once in a while, getting under a lifted...
Just had to post. The weather let up and I was able to put some miles on the car today. There is so much to do still, but the tools were put away...
50 Styleline has rust the entire length of the bottom part under the windshield and a couple of inches up the sides. I know that I should be...
First, very frustrated and yes I did use the search before posting this. After learning the hard way that I needed the rear out of a 4x4 and not a...
Ok so I am gonna put an S-10 rear end in my 50 Chevy. Welding skills are minimal but it looks if I swap the hangers left to right on both front...
Finally am at a point where I can spend some money on the car. I have been getting advice from many helpful people and just wanted to say thanks...
1950 Chevy Styleline Deluxe 4 Door The good: Chevy 250 from an 81 pickup with integrated head and 2bbl 200 r4 from 86 SS Monte Carlo Aluminum 3...
Still trying to put a 2000 Olds Bravada rear end into a 50 Styleline. The calipers are mounted at the topmost position and will hit the frame. My...
Had this running on a stand and all I had was hot to "batt" on cap and ground where marked. Now it won't run, no spark. Am I wrong that the...
This is going on my 50 styleline with 200 4r. I am converting to open drive. Trying to figure out the length of drive shaft needed. I know there...
A day off so I sprayed some oven cleaner,,,, hoping to paint the engine over the holidays Posted using the Full Custom H.A.M.B. App!
Putting a 250 in the 50 Styleline. Already have front discs. My question is about the firewall mounted master I wanted for ease of install and...
Had to bring my wife for an unsceduled medical appt to Houston. Is there any car stuff going on? We will be here till Saturday.
I am gonna put a 250/200r4 in a 50 Styleline. My question is on the crossmember removal. Was gonna take the whole piece out when I notice it also...
Well after a couple of years of gathering parts the transplant has finally started. Took out the 235/3 speed and going with 250/200r4 combo. A...
I am putting a 250/200r4 into my 50 styleline. A friend is donating a shifter out of a 77 Camaro till I can afford the 23" Lokar that I really...
I swapped out my front brakes to disc a while back. My question is since most people swap to the 51 and newer front brakes, are these old parts...
Bear with me cause it all sounds OT. Father-in-law wanted me to go shopping with for a new truck. After a few days of trying to figure out what he...
Posting this as an afterthought. just paid for a tranny crossmember that has a 2 1/2 inch drop. It's for a 50 styleline that will end up with a...
I have read a lot on swapping the c-10 arms into the styleline. My question is can th same crossmember from the truck be used? I have access to a...
Separate names with a comma.