The Jalopy Journal
I was thinking that the pedal hangers were the same from auto to standard but wasn't sure. Anyone know of a bellhousing adapter to allow a...
Like the title says, wanting to convert a 292 auto to a 4 or 5 speed. What am I gonna need? I've got a clutch pedal setup but are the hangers the...
Its a waterpump pulley and I planned on bead blasting it if that would give it enough bite. And no, I'm not doing it myself other then the blasting.
Do you think bead blasting would suffice or does it need to be more aggressive like sandblasting?
Well that really didn't clear things up much. One sentence they say you can't do it then the next they say you can.
Can I powder coat over chrome plating without issues?
Geeze Loueeze, absolutely amazing talent and craftsmanship!!
So it looks like I need to look for a crimped fitting instead of a barb. Another thing, the guy at the A/C shop said that I will need to mock up...
Need some help/info on a/c fittings. I'm putting air in my old pickup and I'm using an old hang on unit from a '66 Mustang and I'm getting ready...
I know this is a really old thread but I've been searching around for kick panel trim clips and I'm going with the metal wire style like the...
It just smells like paint to me.
I've got about 30 or so quart and pint cans of old paint that I bought at an auction probably 7 or 8 years ago and it was old stuff when I bought...
There is no sight glass on the dryer. And according to my Ford shop manual the dryer fittings when mounted are on the bottom.
So I’m using the condenser and dryer from a ‘66 Mustang in my F100 and it’s a great fit.......upside down and reversed. Can I do this or does it...
Thanks for the reply Deuce, and I am running a brand new Sanden 508 compressor. I've been reading up on the pros and cons of the two or really 3...
Been considering converting the old knee knocker evaporator in my '66 F100 from an expansion valve system to orifice tube. The tubes are supposed...
I figured since the condenser was the one used with that evap unit that I would be okay. Really just trying to decide if the R12 is worth the...
Okay here's my situation. I've got an underdash unit and condenser from a '66 Mustang that I've restored and had cleaned and tested and all is...
Yea Yea I think the real "official" name is now Dirty Girl!! Has a better ring to it then the Jim Pike Coupe!! No offense meant Jim!
Hey thats my buddy Mike Meeker's chopped 32 5 window that I mentioned earlier!! Go's by Dirty Girl!!
This is a buddy of mines ‘61 and I’ve always thought that these wheels looked great!
Any other suggestions, let me hear 'em please!
I had thought about using a long spacer in between the bottom tabs on the compressor to help locate it but not sure if its needed. Still thinking...
The two lug nuts taped to the one piece represents the tabs for the compressor to rotate on for tension adjustment and the threaded eyelet...
So I’ve looked online for a passenger side compressor bracket but the one I found I didn’t like the way it put the compressor up so high and it...
Buddy of mine from Fair Grove MO is going this year. Mike Meeker. He's in a brown primered 32 5 window coupe.
I've looked high and low trying to find someone that offers a passenger side mount for a sanden compressor on a small block Ford but no luck. Does...
Instead of using paper cardboard find some plastic cardboard like they use for real estate or political signs, it will slide much easier and hold...
Well stiff I also seem to look for the bad stuff when it comes to car deals myself. My take is the only thing thats been done to the truck is the...
Torque boxes and cab mounts are solid according to the seller. He's got 15 of these he says and this is the best one he's ever had as far as rust...
Separate names with a comma.