The Jalopy Journal
So how do I go from this hub to a 4 bolt fan. I could get an adapter machined, but maybe there is an easier way?[ATTACH]
Yeah I lost the radiator, 2 hoses, fan, and tore the bolts out of the generator mount.
I have never seen an electric fan that didn't make me puke in my mouth,hahaha.
I blew apart my fan on my 8ba flathead. I was running the oil filled hub. I have ordered a flexalite #417 fan. I see there is a sealed bearing...
I think that's what I will have to do. Just didn't know if there was an area that was more prone to wear. If it's the thrust surface on the end of...
Somebody has to have been through this. Picture for attention?[ATTACH] Sent from my XP8800 using The H.A.M.B. mobile app
Thankyou for the reply. I have seen these mentioned before. While that would stop the drum from touching the backing plate, I don’t see how it...
I have a ‘47 open diff banjo out of a pickup. Back lash and preload are good and ring and pinion are good. The problem I have is .012-.014” end...
This came with a project car I just bought. I haven't been able to figure out what it is.[ATTACH] Sent from my XP8800 using The H.A.M.B. mobile app
Got the 216 but they won't work as they have a fixed nut and I can't attach my plug wires. Back on the search Sent from my XP8800 using The...
Ordered the 275. When they arrived they measure way longer than the B6HS. Measured the 216 and they are really close to the B6HS, so I will give...
My '27 T. Mostly pre 50's[ATTACH] Sent from my XP8800 using The H.A.M.B. mobile app
I started a thread to see if anybody is running the autolite 275. Supposed to be hotter and 1/2" reach. I can't find the b4hs where iam. Sent...
New battery,new coil,new generator, new voltage regulator, 2lbs on the fuel pressure. No vacuum advance running as much advance as I can without...
I have a 276 8ba, l-100 cam, 2x2 Holley 94 with .049 jets and 4.5 power valves. Running gm distributor and Bosch coil. Vintage edelbrock heads. I...
I had the little chrome air filters on before and I have removed them. I am running stacks right now so there should be no restriction
Ok here is a bit of an update. I pulled the timing cover and gear and checked against the 2 other I have. The marks are all in the same spot. So...
How did you go about determining that? Pull the intake and set up a dial indicator?
[ATTACH] Here is some of the specs Model T bucket 3spd, banjo, less than 2000lbs. 8ba bored .125, edelbrock head with .055” clearance, kiwi l-100...
from a professional welders opinion, those guys need some welding lessons.
I bought a blank manifold for my 354 hemi on eBay. I received it as per the add. I took the risk that it might not fit, and it doesn't. He wanted...
i got one, it doesn't fit.
sold
So, who owns it now?
Sorry, not "the bat". The hardtop. The article says Moon Eyes Christmas. Here is the Bill Hines shoebox: [IMG] Here is the picture in Rod and...
I posted in a different section and never got a response. Looking through issue 41 of rod and culture. On page 52 is a silver shoebox. Is this the...
Looking through issue 41 of rod and culture. On page 52 is a silver shoebox. Is this the one Bill Hines built? Bumpers, hubcaps, grill and chop...
It's zinc chromate primer. It's usually yellow or green. I use endura aluminum cleaner them endura alodine wash, and zinc chromate primer. Never peels
Ok . The link came up with no threads. Then there is a drop down that says join group. Now it works. Thanks
I see lots of mention about the Upholstery Group, but every link i try comes up with error. Is it gone? If not, how do you get to it?
Separate names with a comma.