The Jalopy Journal
[MEDIA] thats betterer
plus, you shocks wont have enough travel
in my opinion, there is not enough 'coverage' from the main spring to the next one up, IF you look closely, you will note that the long leaf is in...
[MEDIA]
axle hasn't yet arrived https://outlawspeed.com.au/shop/media/catalog/product/S/O/SO001-70507_-_2_full.jpg but it is that one so I can use an...
anyone done a 48'' so-cal axle with oem spindles? thanks are the undersides of a 35/36 bone in the same place as a 37-40
pics and video please thanks
don't forget there are two different bolt thicknesses if ordereing something non stock oh and with some headers, you can only really use a socket...
a 37 to 40 wishbone perch distance is 37.5 inches a 35 and 36 wishbone perch distance is like stock early ford 36.5 inches aftermarket axle...
[MEDIA] [MEDIA] [MEDIA] on to groovy things now
so you definately have a manual mustang 2 rack at 9/16 rather than a power rack?
search a P5B rover or a P6 rover these run a round pin rubber if you are going into narrow chassis rails, its the best situation land rover...
'even' if you have a new aftermarket 4.5 by 16 inch steel wheel they do not have a snap bead built into the rim and are spcifically manufactured...
[MEDIA] [MEDIA] [MEDIA] getting there
Is a 36 the same as a 37
do you have the later 8ba twin crank pulley and 1/2'' belts rather than 5/8ths single belt is the other side spinning the fan hub or a power...
nobby's 1936 ford pickup project 10 March 2024 (youtube.com) so that rust covered rear cross member in that 36 frame isnt a 36.. ? this might be...
[MEDIA] [MEDIA] [MEDIA] swap a 47 - 34 2 1/4 drilled forged one for a 48 36.5 2'' one then!!! 37 38 39 and 40 are 37.5 then, on the perch..........
do the 35 and 36 fords use a flatter rear crossmember than 37 38 39 and 40?
planning on switching the rear crossmember from a 37 to a 36 to lower it some, looking at the 36 crossmember, does it use the same 37-40 rear...
put a cooler in the return, as that box is rather close to the exhaust?
is it pumping foamed oil
[MEDIA] [MEDIA] [MEDIA] it was a long day
Nobby's 1936 ford pickup project 10 March 2024(1) (youtube.com) stock 36 bone and axle, with the un modified 36 ford tie rod , as it came from the...
I think it has more to do with the 'actual' flange offset, or how far the wheel mounting face is out past the bearing as you 'just' assume...
IF you try and fit 2'' wide shoes 'thinking' it 'might' be an 'upgrade' they will not sit in the upper pivot pin correctly
11 by 1.3/4 brakes are ford bronco 1969 11'' brakes rear those brake back plates are the only small bearing back plates that are 11'' I am...
yes, its a bit simpler if you have a wheel base of 112 inches -( 37-40 spindle) and a king pin width of 48 inches and your track is 57.25 inches...
I am going to say no it doesn't, as the only pivot stock, is at the wishbone ball and that is that
using stock 36 radius rods ... i have the radius rods - 36 i have a flatter 36 rear crossmember - going to switch it in are the springs the same?...
Separate names with a comma.