The Jalopy Journal
1948 Anglia, chopped top, used to be a drag car,have some history dating back to 1964, glass doors, rear fenders, trunk lid, tilt nose, all...
I bet one of you guys has paired a Chevy trans / driveshaft to a 57 Olds rear. Can you remember what U-joint it needs??
Did some searching on here but really didn't find anything. Can I reverse the brake side to the slave side on the old GM style master/clutch...
I have seen a lot of posts on here on these mags, but my question is what is this heavy bracket on the lower end for??? [ATTACH]
I have what I was told a 57/60 Pont/Olds rear axle. Its been narrowed with Summers Bros. axles. My question is what are the odd looking rings...
I have done Econoline type beam axles before, z-cutting, and fishplating the weld, but what are you guys take on narrowing a straight tube axle ???
I need a recommendation for some coils in the rear of the Anglia on my avitar? Currently has 5" or so dia in it but they are killer stiff. Trying...
NEW EDELBROCK AIR GAP DUAL QUAD INTAKE FOR FORD. COMPLETE WITH EDELBROCK CARBS. CARBS WILL NEED FRESHENING BEFORE RUNNING. WILL FIT 260 / 289 /...
NICE SET OF VINTAGE 12 SPOKE WHEELS. I BELIEVE THESE TO BE AMERICANS, BUT DO NOT SEE ANY MARKINGS ON THEM. THESE ARE ALUMINUM. FIT FORD SPINDLES....
ABSOLUTELY NEW AND UNUSED REAL LEATHER BUCKET SEATS. BOMBER STYLE. WOULD LOOK GREAT IN THAT NOSTALGIC ROD BUILD OR ANY STREET ROD. THESE DO NOT...
Anyone have any idea what brand these wheels could be? 15x4 aluminum spindle mount for Ford spindles, 12 spoke. There are no markings on the...
Is a 5 speed trans out of an 85 Firebird worth using ? Will it hold up in a hotrod???
Anyone remember seeing this Yellow Anglia in Upstate NY or PA back in the day?[ATTACH]
Nice Comet old school look drag car. Built to resemble an old gasser class or S/S car but just a nice street car. Has a stout 302 / World Class...
I have an aftermarket tube axle with Anglia spindles. Are there any brake kits for these, or can I adapt Ford spindles to it?
Very solid 61 Ford F-100 Unibody pickup. Yes its the desirable short bed !!! The only rust is in the step wells of the cab, (a very common place...
My 65 Comet build has a set of stiff front springs to get the nose up, but now it has a nasty camber(way in at the top) What will fix this???
I've talked to a couple vendors about my 65 Comet. They always ask if its a Caliente???? As far as I know its just a 2 door hardtop. Reason I'm...
Apparently there are some differences in the manual and power steering setups on my 63 1/2 Ford Galaxie. I have the power setup, but a previous...
No brand name other than size and USA on the inside. What type of lug fits these wheels. There are regular acorn, bulge acorn????
After not being able to source a u-joint to go from a stock 55 Ford driveshaft to an FMX yoke, i've decided to go ahead and swap out the rear end....
I've done a good bit of searching on here, but have not had any luck. Is there a u-joint that will connect a stock 55 Ford driveshaft to a yoke...
Can I sell my car in NC with a bonded title? I just got it a couple months ago. I've heard some states require a 2 or 3 year waiting period!!!
Complete 272 Motor and Fordamatic trans from a 55 Ford Fairlane. Still in the car running and driving . Engine has rear main leak and low oil...
Been chasing an oil leak at the back of a 272 Y-block in my 55 Ford. I thought it was the rear main, but I changed the oil yesterday, today came...
Been searching the threads, no luck. Do I need to pull the engine and trans together in the 55 or can I just pull the engine alone???
I've got a 272 Y-block with a Ford-O-Matic trans In a running driving car right now!! Any intrest in this unit?
Did s quick search here but didn't find what I needed. Got a 55 Ford I'm changing the steering box on. Will it come up through the floor or down...
I recently bought a mild cruiser 1955 Ford in Ohio, got all the paper work, docs, notarized ect. DMV in NC took everything ok and gave me a...
Any recommended cruise ins in the Vegas area from the 6th to the 11th of June???
Separate names with a comma.