The Jalopy Journal
1/2-ton with 302, AOD, M-II front, Explorer rear. I've lost interest. It drives fine and needs paint job. Call Jon at 501/350-1650
59A block ready to build. Hot tanked, valves and seats ground, new regrind cam, new bearings (cam, rods, mains). Sharp aluminum heads and 3 - 2...
1927 Ford Model T Roadster Pickup Project Real Henry steel RPU body with working doors, new latches OEM Windshield stanchions 28-29 steel grille...
Jim I read your note about how busy you are now but I hope you have a moment to answer my question. I see a lot of discussion about which coil...
My 8.8 rear end has a shock right next to the u-joint on the right side. I used it and another one just like it and mounted them at each axle end...
OK so what is the difference and why use one over the other?
I have a 52 Ford F-1 and I want to modify a second speedo into a tach. I think I have the mechanics worked out to convert the speedo, so somebody...
I'm and old guy so cut me some slack on this question. I see references in threads that mention to apply sealer over primer before the top...
Is it ok to bead blast pistons to remove carbon on the dome and the skirts?:confused:
Is it ok to bead blast pistons to remove carbon the dome and the skirts?:confused:
Is it ok to bead blast pistons to remove carbon on the dome and the skirts?
Original factory wiring in old 49 to 52 Ford trucks didn't have fuses. Just 2 circuit breakers. I guess that worked for years but now we are...
I got my 1990 AOD transmission rebuilt and re-installed behind the EFI 302. Now I need a TV cable and cannot find one! The tranny and engine...
My old truck has a new/used 1990 Ford HO 5.0 (302). We have not hooked up the old guages yet but we did put a guage on it next to the oil filter....
:pLucky me! I was able to get my truck licensed today with year of manufacture license plate today. This is easy if you find the right person at...
My project is using early Ford spindles and and F-1 steering box. My plan all along has been to use heim joints instead of tie rod ends. Now...
My old F-1 now has Mustang II/Pinto IFS and I'm shopping for new strut rod bushings. Can somebody tell me why Napa, O'reilly's and Advance Auto...
My donor car is a 1990 Lincoln MK-VII and I'm using a 8.8" rear out of an Explorer. Why does the Lincoln drivershaft have 2 u-joints on the end...
I've been rebuilding the front brakes for my track T, and while I was putting the brakes back together I noticed that the backing plates are...
Ever since I signed up the board has been nagging me to introduce myself. There goes my thoughts of remaining incognito! I am an old fart...
Separate names with a comma.