The Jalopy Journal
Bump, make an offer, any takers for 700?
Bump, make an offer, I would really like to get these out of my way!
Make an offer, has a hurst shifter on it. Comes with clutch, flywheel, small block 318 mopar later model bellhousing. 3.09 first gear. 23 spline....
I have 5 1941 pontiac rims and tires. Tires are dryrotted but hold air. Have 4 center caps but they are not matching. Do have trim rings. Wheels...
My buddy has white walls on his Harley, magic eraser cleans white walls easier than anything else out there. Posted using the Full Custom...
I run a 455 olds and a third gen camaro posi. No spring wrap problems or wheel hop issues. All on stock springs with lowering blocks. Only issue...
thanks for all the info guys, i will put somethin together.
Thank you.
I got a resistor but in the directions it says i need to know the ohms range of my gauge? Depending on the range i may have to use more than one...
i switched over a 1937 dodge to 12 volt but want to try and use original fuel gauge can this be done and how
I do have a bop th350 that i got with the motor, but i think its shot. I cant turn the input shaft no matter what position the shift linkage is...
Yes driveline plans are still on the drawing board. I dont plan on doing the swap till next winter. Just trying to get everything planned out and...
Im a little confused now actually, the information I have says the 67 lemans had a 3 speed column shift trans, the st300 is only a 2 speed right?...
I guess your right kcl, after doing more research the lemans didnt come with a glide. It came with a 3 speed automatic, the turbine 300. The trans...
Thanks for the advice, maybe ill just sell it or trade it for a th350 or 400.
I have a 1974 olds 455 that i am going to put in my 52 chevy fleetline. I am getting a powerglide from a 67 pontiac tempest for free. I was told...
I will have to take some, i have been slacking on the pictures, barely have time to work on the stuff let alone try to take pictures along the way...
So i picked up a starter for a 93 dodge ram. Bolts right up, plenty of clearance! Thanks 1950coronet600hp! And it only cost 60 bucks!
Thanks for the ideas everyone. I think an anch and a half offset to the right would give plenty of room between the starter and steering box. I...
Haha, yeah i know things need to be cut, moved, bent, whatever it takes. I have done plenty of it on my own projects. I told him cutting the...
Hi guys, i have searched this topic all over the web, not just on here and am having trouble finding info. Is this really that uncommon? I am...
I do hear some valvetrain noise, but i believe some of the other noise that sounds like a knock may be that generator floppin around there....
My 52 Fleetline has a 216 babbit motor and people cant believe how quiet it runs, people always comment on how smooth it is and how you can barely...
Thanks for the info, I am definitely gonna do it, just trying to prepare myself for any bumps in the road that I may come across. I have the tools...
I searched the web alot about this but there doesnt seem to be much info on this. I recently came across a 455 olds motor, with a b&m th350 b.o.p...
In these motors, (235 splasher) what is more likely the cause of oil consumption/smoke? Im thinkin of just puttin valve seals on the splasher and...
Yeah that is pretty cheap! The tricky part is explaining to my wife why i have to buy another motor, haha, so i need to get rid of the one i got...
Thanks 29nash, i will definitely pm you when the time comes if i am going to go that route.
It is definitely a splaher, has the plate on the oil pan rail and the casting number says its a splasher. I was thinkin maybe i could re ring it...
Separate names with a comma.