The Jalopy Journal
Ok so those are 32 spindles. I have the later round spindles.
So out of all of this I have been told I do not have the flat backing plates and do not have the deep backing plates but the in the middle plates....
Sorry De Soto The Bolts on there are mock up only. I have a whole bin full of correct Ford bolts for the car. Everything on the car will be pre...
Ok so then what the heck is going on then? Are you using the stock drums and hubs. With the 39 you are useing the Model A- spindles so that wont...
Backing plates are fronts for sure.
But that puts the bearing load in the middle of the spindle. Instead of the strongest part of the axle. I know what i did to make it work just...
The hubs are already on the inside of the stock lincoln drums. So whats the differance?
Ok so the bolts are fine they dont come close to the hubs in the drums. So fare all the answers have been rule out except the ford spindles or...
Sorry I guess I didnt say this the bearing is fine. The drum race is not hitting the bearing. Unless i space the bearing out on the spindle.
The bearing fits the spindle fine and the backing plate is fine. The drums inner race does not seat against the bearing unless it is spaced out...
OK I have gone through all the older Lincoln brake posts and can not find anything close to this. Maybe I am missing something I dont know. I just...
Who Fucking cares! If you go to shows to pick cars apart you must not really be a car guy. Because i give credit were credit is due even if it not...
There is always so many car events happening here on the left coast that it usually has to be pretty dam good or special for some people to go up...
Good things happen to good people,Great artist even greater guy. I wish I lived closer to him I would have a whole house full of his shit. Instead...
I just sold a 34 cowel for $100.00 i bought it just for the stock fire wall. So hold out and you will find one.
Burbank WHO? What did they DO? Are they some kind of motor sickle gang? HaHa!!
Speedway motors sells panels 12" wide up to 48" long.
That's a little of everything.Street rod,kustom ect..
57 heres a pic i used them on my 31 A Roadster.
I had the same problem when building my model A roadster the rear end i used came out of a 49-54 ford and had the same yoke i change it to a newer...
Here is my 55 210 my dad raced it here in Southern Cal back in the 60's and when i gaduated from hi school hey gave it to me.I didn't respect the...
Hey i just went through this bought a body and frame seperate and had no bill of same or title.In stead of getting the run around from the...
Separate names with a comma.
The Jalopy Journal