The Jalopy Journal
70caminoman,thanks for the info man ........nice tattoo :)
bttt
Im having trouble understanding the graph that came with my advance kit and vacuum advance kit.Does mechanical come in at 500 rpm with the light...
I have been making great progress,running a/c delco R44t plugs,gapped at 35.Medium and light spring in the distrubutor,accel adjustable vacuum...
56 sedan thanks for your input:).It does seem to run hot.Im going to do what ya said and see how things go...........Now why did it have to start...
Thanks for the info!:)it came in a chevy nova I picked up,turbo 350 trans,stock gears....I think.245 60 tires.Sorry for my lack of knowledge but...
A month or two ago I posted that I have picked up a 350 w/ 305 heads and got some good responses on why this was done.Well the weather has gotn a...
I didnt want to beat on it(yet:))Still need to do a few things to the car.Pulled the valve covers today and I cant believe how clean the heads...
Im still trying to find exactly what this motor is out of but have not found a definitive answer Block vin/suffix codes are 112151281 K11 18...
Trying to figure out this motor I got.Under the valve cover was 14022601(305ho)back of the block 3970010(1968 327,1969-79 350).Why would this head...
The little bit of gasket that I can see does appear to be blue,I'm guessing thats the felpro gasket you all have mentioned.I have looked on you...
I really appreciate the input.Makes complete sense that the seals are now compromised.Didn't really think about it like that.I certainly dont want...
I just took a really good look at the intake,there looks to be a bit of oil seeping out from the four center bolts along w/ the coolant leak from...
Oh no!!!!!!!!!! :( I hope I didnt screw it up!Now Im getn worried
It was installed when I got the motor.Could the bolts have been over torqued and compromised?
sbc 350.I'm finding to small puddles of antifreeze on/around the second set of bolts on the front of the intake.It is an Edelbrock performer...
You couldn't have said it better!-Internet shopping is way cheaper and no douche bags to deal with :D
Yea I read about these and they were going to be my next try.I'm really happy w/ the cherry bombs....I was a little reluctant to try them but am...
When its cold I give the fuel pump about 20 sec to get fuel to the carb.Close choke all the way.Push gas pedal in once and attempt to start.If it...
Cold start is when its been sitting a few days.I believe its the 600 cfm carb.Electric fuel pump at 9psi
Once motor starts and gets to temp it runs great
I'm having cold and hot start problems w/ my 350.It has a mild cam,edelbrock performer intake and carb,Gear drive.Headers.The motor stumbles, cuts...
for a bit I tried 2 1/4 and an x pipe,no mufflers.At idle it sounded ok,Kinda like a boat which I didn't care for.I hated the deceleration...
Tried a set of 11226 magnaflow mufflers......once again quite....Took fatstax advice and got two cherry bombs :) perfect.At idle sounds great...
Do you get that burble in between shifts?
Ok so I put on a set of cherry bomb turbo`s tonight and its sooooooooo quite,not to happy.
Running a 350,mild cam, shorty headers,2 1/4 pipe with x-pipe,exits at the rear,generic mufflers.I'm new to the SBC 350 and I`m searching for a...
thanks for your response and info, LowKat-is that for a two part rear main seal?
Still have had no luck finding any info on this flywheel-any body got a clue-Ive searched for weeks-nothing
Separate names with a comma.
The Jalopy Journal
