The Jalopy Journal
Only $100....
http://www.myks-tools.com/
[IMG] [IMG] I've got a Myk's pivot plate. As the pull-out resistance of a 5/16" bolt in cast aluminum is more than 5,000# and I use four of...
What word would describe the condition of the motor at the point it won't increase in rpm due to the action of the converter?
The water outlets are different on the two manifolds. On the C3BX the outlets come out the top of the crossover. If I was putting a 283 in front...
Thanks for the answer, it's all coming back to me now. Several years ago I built a 64 Chevelle road race car for a Swedish guy and this must be a...
[IMG] I found this old dash cluster out in my garage and I am trying to identify it. There is a stamp on the top APR 16 1964 There is a stamp...
Raise one wheel off the ground. If you can easily rotate the wheel without the other one moving, chances are very good it's an open rear end or...
In the case of Packard, ALL their funeral cars were built by Henney of Freeport, IL., owing to an exclusive contract (quick quiz: why did Henney...
My Holley catalog lists the stock primary jets of the common 600 cfm vac secondary R-1850-AAS Holley as 22BP-40-65. Is your power valve okay?
[IMG]Got a defroster?
Jewel wrote and sings a slow blues song called V-12 Cadillac that would do well as an oil-pouring dance number.
I would pull the top off the carb and check to see that the secondary accelerator tubes are still installed. It's a common problem with Q-jets...
Separate names with a comma.