The Jalopy Journal
I have a bunch of Ditzler Laquer paint, thinner , high gloss clear, and primer sealer.. 6 gallons of DTL -105 acrlyic laquer thinner (formerly...
Bitching NOS late 60's old chrome roll bar. 3 piece heavy wall tubing bolt in roll bar, with original hardware. Never installed. A pretty RAD...
Green Hell, A retrospective 29 Roadster build: I could never wrap my head around finding the time it takes to create a real time build thread,...
There were a couple of comments on the custom tack strip I made for my 29 roadster.. here's how I did it; As you already know, the part of the...
I started collecting parts for this project just about 10 years ago.. it was literally a pile of parts that fit in the bed of my 31 Pick up....
I have a fuel injection set up that needs to gone over.. is this something I can tackle myself, or should it be left to a specialist? my concern...
Up for grabs is a brand new swing pedal assembly made by Lucky's Speed Shop. These are a very well made and beefed up version on Ansen pedals,...
it seems that i've run into a SNAFU.. i recently acquired a mint Weiand 04D 2x4 intake for my 56 324 olds.. low and behold the bolt holes do not...
I bought these with the intention of using them for my roadster project.. but have since changed directions- they are made by RJAYS speed shop,...
Just want to this out there.. more specifically the guys name or alias- the long and short of it is i got burned for $250 by someone responding...
Curious who has done this??? I'm in the process of building a 29 roadster, and considering using a column shifter set up.. The motive is to save...
i have some nice original 1940 suspension parts up for sale- front axle [ATTACH] [ATTACH] - $100 or bo- and also a passenger car rear spring,...
Selling a complete 1966 powerglide trans- I know for certain it's a V8 trans, it was behind a 275hp 327 Not sure if it works, oil is NOT burnt....
If there is anyone out there hauling stuff in Nevada/ Cali hit me up.. I need a quote to get a sbc from Reno to L.A... no rush as to when it needs...
i've been told that the simplest way(if there is such a thing) to accomplish what i'm planning on doing is to run a 60/62 c10 v8 hydraulic...
my project is finally buzzing down the road.. just wondering what you olds guys are running in the way of rear end ratios, as well as what kind of...
i finally got around to replacing the wood in the roof of my 30/31 closed cab pu.. it was long over due, the wood was totally wasted.. the result...
While doing some fine tuning for a shakedown run something strange happened at idle. Suddenly the voltmeter(yes volt meter opted not to use an...
I searched the topic a handful of ways, and came up empty handed... I'm looking to narrowing a set of rear fenders to use with my 31 wide bed...
Just for the record.... i have been reading and hearing about stuff like this for years, always with a hint of disbelief, and then- i get a phone...
I recently came across a bunch of gauges, i was able to id most of them.. except for these- the SW Motor minder doesn't look like the any of the...
I'm having a bit of a brake line dilema.. Here is what i'm building... A full fendered 1930 Model A pick up truck.. 324 olds, t5 trans, 58/59...
i'm about ready to start plumbing my brake system.. here is what i got- Model A Truck- 40 ford front brakes, rear are 59 ford F-100 dual res....
what i have is a 56 olds 324 with a Eelco adaptor, and a T5 trans.. the adapter came with a clutch fork... i believe from a early 60's chevy...
it's me and my garage here.. i'm in the middle of setting up my front steering, and while waiting for the parts to rebuild my steering box i...
here's what i have.. 1930 Model A closed cab PU stock frame, 4" dropped (stock)axle, 39 spindles, 40 box flipped(pitman arm facing up for side...
what i have is a late 1930 closed cab pick up... the bed that came with the truck is a 31 wide bed(total score), and it's in great shape... the...
Has anyone had any recent dealings with Eelco? Apparently Marty is ill and as a result Eelco's office will be closed until further notice- the...
Sparing the long story... I had a billet steel flywheel made for my recently totally rebuilt(and balanced) 1956 324 olds engine..... When I went...
the mission.. square up the cab to get proper door alignment, brace up cab, reverse the firewall, and channel cab 4 inches, than figure out...
Separate names with a comma.