The Jalopy Journal
is it a truck three speed on a car bell housing that has had the factory register enlarged by hand filing
i think they have 9 inch diameter brake drums that take a 1.80 inch wide shoe. the trouble is with a 56.5'' wide axle in a 35-40 frame is...... IF...
[ATTACH] wp-9 left wp-17 right wp=9 torch body on the right. about 40 amps, DC electrode negative, flowing 15 cfh of pure argon . I did not use...
I havn't started yet get the mill scale still waiting fo rthe £6 torch and I bought a mono cable and the diamond disc hasn't shown up yt. big...
yes, i have the bumper no idea on how far from fender and the shape and position
can anyone draw or trace a front bumper iron for a v bumper then draw a box around it with measurements - and mark the bolt holes distance from...
yes, 1mm red tungsten on DC amp range is 20 to 80 conflicts if for example on dc - 10 to 60 max that is good to know, as I know I shall never...
Ford GM Tremec Borg Warner T5 5 speed transmission main case | eBay 1994 1995 Ford Mustang 5.0L 302 Manual Transmission T5 Five Speed Dropout G06...
oh and what are the part numbers for the different bore rear wheel cylinders that FIT 10'' ford brakes - how many different sized bores will...
what just got me was the older style sykes pickavant non turret type flarer and the modern turret type and if you do get the 3/16 line for 3/8...
A most Gracious thanks to all for imparting you knowledge so far...... As a starting point [IMG] bought one of those. before plugging it in.... -...
also, the gas diffuser thingamybobs arrived so if for example you have a gas lense or diffuser at 10mm if you then fit an 8mm shroudy thing upon...
[IMG] ahh, what was confusing me... integrated gas and power cable the gas flows inside of the power cable [IMG] so, the question is, do i need an...
is the total length of the inner shaft greater than 31.25 inches?
[IMG] i think this is an OLDER chassis engineering style made so the shock mounted forwads of the spring perch, sits further inboard to clear the...
HITBOX 5 Pin Foot Pedal for TIG Welder HBT2000P Cold TIG Welding Machine | eBay ahh, thats it sliding resistor? i thought it would have spun a...
while I am on why do you use acetone rather than isopropyl alcohol for cleansing just got some acetone delivered and I forgot how much i don't...
erm, the trouble is, they put into the box a euro 2 pin plug to UK 3 pin plug adaptor......... this adaptor does not have a euro earth pin...
so, the welder has arrived [IMG] comes with a euro plug.... hmmmmm
DRB FAB BILLET Lower Steering Column Bearing 73-79 Ford Trucks and 76-79 Broncos | eBay bit sexier
STEEL Lower Steering Column Bearing 76-79 Bronco and 73-79 Ford Truck F150 F250 | eBay made in the usa
Lower Steering Column Bearing For 1973-1979 Ford F150 F250 F350 Bronco Truck | eBay
yes, so i have only gone and bought one of them cheap tig welders looking at the pictures I am thinking what is the cold tig setting turns out...
True Color Solar Auto Darkening Welding Helmet Mask Grinding MIG Welder 100*80MM | eBay [IMG] talking of helmets viewing window i gather you...
run the short end cap the number 10 pyrex the torch wants a switch only buy any tig welding machine with a cold setting use the cold setting to...
pre grind you tungstens [IMG] they come 6 inch long they want to be 1.5'' long, grind bothe ends buy a diamond disc and simply spin the 1.5''...
[IMG] so far....... start with a WP-9 tig torch -as its smaller, and 1mm collets and gas diffusers or lenses are more readilly available for them...
so you can get pre ground tungstens at 1.5inches long, or 38mm ground each end. so is it 1.5 inches fits the torch for you to use the short end...
mr happy daze the er70s - 2 does that translate over here to a15 or is a15 simply the er70-s and the -2 bit is significant somehow?
i didn't know you could get a smaller torch just bought them wp-17 kit stubby lense pyrex for the beginner i think the torch on this 200AMP Cold...
Separate names with a comma.
The Jalopy Journal
