The Jalopy Journal
Thanks for all the feedback I'll put on my shoes and didi mau
It’s a long ways away. If I got more serious about the car, I might get someone to check it out. The price is decent enough (maybe too low?…which...
anyone heard of or know this company ?...
.......maybe white in lieu of black in those areas ? and white walls for more contrast
https://en.wikipedia.org/wiki/Continental_Motors_Company Dad gave my brother a 54 Willys for a school car that had a 4 cyl cont around 1962. .....
just so people aren't confused, stanlow69 and I are talking about the same thing..... [ATTACH]
LASR (Lincoln Area Street **** ) aka Speedway Swap Meet; March 4th Rocky Manginelli swap meet, Lancaster Event Center north 84th St, Lincoln, NE;...
Assuming the 392 is similar to a 331; Before you do anything, make sure whoever did the engine work put the correct plug (1/4" NPT) in the oil...
Vertical and Horizontal use is not the same The original GM p/n was 6422294 (item 5) ; this diagram is for a 283 [ATTACH] NAPA CRB29255 is a...
not his first time around the block...so to speak
@34 Airflow Are your sill plates in good usable shape; or what's your plan for those? [ATTACH] Although mine are complete, they are really...
Early pics of Test/Run Up stand made for the 331 that's going in the '40 Chrysler Royal. [ATTACH] [ATTACH] and, in use……...
Saw this on another forum and thought y'all would be able to make use of it... ..[ATTACH] and let's not forget about the one behind the...
OK, thanks
Lookin' good, 34 What was used for the fender welting ?
Would 215 65 16 P4 Pirelli's work ? According to the Tire Size Chart, looks like they would be 27" tall. The rear end has been replaced by a...
What would be good tire size for 16 x 6" rims for the 40 Chrysler in my avatar which came with 16" rims, but were too narrow IMO. WheelSmith rims...
^ you're saying the RTS has a synchronized 1st, right?
it’s not my vehicle, but for a nephew. I grew up shifting all kinds of un-synchronized transmissions; AC, John Deere, Case tractors to name a...
Thanks klawockvet for that. Do you any pix of the xmsn or the installation?
Any one purchase/use a Mitchell synchronized transmission for their Model A? Results, opinions ? Does the existing "hogshead" work for these?...
Still have the Craftsman 1/4, 3/8 & 1/2 ratchets I bought back in 1967…. work just like they did back then except for the 3/8 which had to have...
^^ what size tires are those?
Was the Plymouth version of this called a “Concord”? In the 60’s, my older brother had a 1950 Dodge; the engine went bad and Dad bought a...
That DeSoto wagon is neato! I see there’s no hitch for the camper.; will you be doing that?
The cable to the xmsn can be re-routed / adapted to a floor shifter. I did that to a 1957 Dodge around ‘65. The detents in the valve body were the...
Always liked those Mercs ! Have fun with it. I’d leave the side trim on; just my opinion.
That's a real beaut !!
Not mine, just passing this along. Could make a great Hot Rod or restore More pix on the link [ATTACH]...
^^ once had a job for local company that had imported German machinery. They sent over prints of an additional mechanism designed by the same...
Separate names with a comma.
The Jalopy Journal
