The Jalopy Journal
So that’s tracer is a $395.00 option
Im sure I’ll show my lack of knowledge but I’d guess it’s some software that...
Thanks, that was extremely informative.
That one project in thick, (so far)
I think I’m going to have a go at making it by laminating 3/16” plates then working the bevel by hand with...
Right, sometimes they had a lead in and lead out line too. That left a little titt to grind off vs a pierce hole
I need a lower die holder for my bachoven Meyer reciprocal machine. If I can adapt the holder to my machine I can run the Pullmax dies found...
Do you want to try tomorrow?
It’s 48” x 16” x 2-1/4 thick
I’ll get those good pics tomorrow
So you started your statement with “IF”
In My world, I realize other peoples worlds are different, but in my world something always starts...
The CNC stuff makes no sense for onesie twosie parts. The extra time and expense I’d just hand cut and be done with it like I’ve been doing and...
Id buy it tomorrow!
On another note, I took a large pattern/ hammer form I made out of wood to a machine shop. I wanted a copy of it made in steel. (It’s 2-1/4”...
Maybe you guys can help with some technology or terminology for searching what I’m looking for.
Long time ago an every shop I worked in had a...
I’m looking for a lower tool holder for Pullmax.
Plan is to adapt it to my bachoven Meyer machine and use available tooling.
Awesome stuff here!!!
It’s still rough,
Doesn’t seem like 10 years.
Good on you bone yard!!
estimated curb weight?
Reality based driving goals?
The combo is capable to give you something near 300 hp. Maybe 285 maybe 325.,,,, so don’t...
I wouldn’t have 1500 rpm as the target - not with a carburetor and OD.
I wouldn’t look to your late model pick up for guidance either , because...
Its still going all going to depend on trashing the stock heads , which ones you’re going to use and rear gears choices and your target 65/70 rpm...
I was kinda depressed about it being “almost a year”
It’s more than simply making a mistake, now I’m all kinds of fucked up!!!
Ohhhhh shit ,,,,
Feb , 2021 ,,, that’s almost a year ago.
I really have not touched it since. Literally no touchie. Not even to move it. That’s why...
The 8.8 exploder rear end is stout!!!
Easily narrowed and centered.
The OD tubes not only bigger it’s 1/4” wall tube. Deceivingly heavy .
I’ve got an I phone without the app.
Once ive read it it won’t be “new posts” any longer. It will be in “recent” because I’ve seen it.
If i did...
glad you got it!
I get an old distributor and grind the gear smooth. Put the drill where the rotor goes.
That other wire (brake switch from the harnes) may be for transmission lock up converter
Your brake switch shoul
The brake switch has 2 posts.
One side is +12 volts from the battery. The other side goes to TS switch. The wire...
Which wire is hot going into that TS switch ? you might have to disconnect 1 at a time or all of them to find it.
Well that’s missing some info, like a headlight switch feed .
Looking at that schematic, there’s just 2 ways for power into the TS switch.
Separate names with a comma.