The Jalopy Journal
Ahh, you have a gauge. We didn't, but being off a little in our situation wouldn't have the dire consequences as yours could. ;) Thank you again...
Awesome as always. :) I've just caught up with this thread, again, amazing stuff. I do have one question though, I've only worked mechanical...
That looks Bitchin! I especially like the High Carb Diet. :D FWIW, I've got a stroked 302 (331) "Windsor" in my avatar (it's lower to the ground...
Just out of curiosity, why take the stroke out? If you have a good crank for the 350 already, it would be somewhat less expensive to use that, and...
Soooo, what you putting your 500 Cadillac in? (you said Torque ;) ).
We have not had a meeting since our "hunker in place" order came down. It has changed somewhat however recently and it looks as if we can have at...
Huzzah!
Better helmets have multiple sensors to prevent that being a problem.
Could be a tank, or other tracked vehicle. If not a vehicle they were used with generators and pumps. I'd be curious to know what brand and model...
About to be half the man he used to be.
My .02, buy the best autodarkening shield you can find. I've tried the cheapies (Harbor Freight, et al) and found that the more expensive helmets...
Very similar to what I have / had, except the housing didn't go all the way down. There was a gap below where it would pilot in the manifold and...
More like "dig this crazy mixed up plumbing." Edit: didn't push the z hard enough
I had a distributor drive for a Chevy (misplaced somewhere at the moment) with the tach drive out one side, a Hilborn PG150 pump and drive out the...
MMmmmmm, not seein' it.
Damn.
I'm working on the A, the house, helping with family. Looking forward to getting back to work when we get this under control (yes, laid off,...
Yeah, we really are finding out how many meetings could have been an email.
Yanked the T5 out of the A to facilitate a clutch change. Going from a Hays 95-201 10.5" sprung hub ceramic to a McCleod RST Twin disc organic....
[ATTACH] My first try on my new phone.
WOW! [IMG] This is a blast from the past. :D
Good Luck! :) Would something like the flat inner hose wire from Russel help with the kinked hose, to prevent it from happening again? If you...
Good luck.
Damn, just heard, RIP.
Last time I had any machine work done in Oregon, it was @ E&L in Hood River. Last I heard they've moved (it's been quite a while since I've done...
It appears they are driving the blower off the small engine, saves parasitic loss on the main engine. With no throttle blades on the blower I...
In the interest of spending your money once, find a current copy of Leo Santucci's "Power Manual" (ISBN-10: 1931128278). While I don't have one,...
Maybe. I would think it also has a bunch to do with larger displacement engines, and higher compression ratios. I've seen an older 228 CI GMC...
No worries, I wasn't upset and I don't doubt you hadn't seen otherwise.
Just saw your reply. The piece of equipment I remember in particular was a Snow Cat (1964?). Auto shop teacher was restoring it when I was going...
Separate names with a comma.
The Jalopy Journal
