The Jalopy Journal
Hi everyone. Thisnis supposed to be a 1933-34 Ford front spring. Now, im not sure about it being front. Can you tell from these pictures ?...
Hey Biggun. Can you recommend who should I buy clevis from or at least what brand ? I'll go with heims for the frame. I'm interested in...
Hi everyone, Ive been told to have my hairpins built with all heim rod ends front and back. I dont remember seeing any built like that, most...
btt
That's what I would like to know. Given it's such an old column, is it possible to shorten it and adapt to a newer box ?
Btw. How do I know if I need oversize kingpins ?
Doesnt matter rally. I can get things shipped here feom the US. Are Moog's good ?
Hey guys, So. I'll be using 47 ford passenger car spindles and a 34 passenger car front axle. Which kingping sets should I order ? Specific for...
Thanks Squirrel. It will be just a few months and the engine is stored in a shop so I guess I should be ok.
Thanks mike. Good advice.
It's really not. Not most of the country. I think you are probably confused with the caribean.
Thanks Squirrel. yeah, compressor and gun wll be the first step.
Guys, We've done a pressure test on the poly engine I bought a while ago for my coupe. There was a ton of rust built up inside. Chunks of rusted...
Sorry Indy. I should have been more clear. Front end will be all Ford. Axle and transverse spring
Hi guys, Im going for an allmost all 34 Ford front end ( F1 wheels/brakes ) cross steering setup. Id like to use the original 33 column. Can it...
Thanks Indy. But what part should the filter go ? Return hose to the radiator ? Pump input hose ? Btw. Is the panty hose really about using a...
Hello man. I can only find oxalic acid in powder form. How do mix it ? Can I do it with distilled water ?
Guys. Could someone tell if the Carter on the images could be the original carb for the 315 ?? Thanks !!!
Small update. This thing is back to life and running strong. Good oil pressure, no water or oil leaks anywhere. Hidraulic test results were...
Would it fit 325/315 polys as well ? Thanks
Thanks a lot for taking the time, Stray. Yeah. I'll probably get all the parts necesary to use a sbc pump from hot heads. I dont see a reason to...
I really appreciate that stray !!!
Thanks all !!
Chrysler never produced V8 engines down hete.
Gary, check the images I posted before your last answer.
No, no exhaust manifolds. The guy who sold it to me suspects they put an external water pump on it due to those little pipes. Thus he thinks it...
Anyone on those apparently extra water outlets on the block ?
Yeah. Ive been trying to figure that out. Checking all pictures I can find of 315s but none is clear enough to tell. Why would a truck engine...
How can I tell about the cooling system type ?
I think so. Why ??
Separate names with a comma.
The Jalopy Journal
