The Jalopy Journal
yes, but I used a band clamp to a matching pipe size exhaust.
[MEDIA]
not sure, this might be temporary or he may make a hood that mounts higher on the cowl.
I made up a filler panel for the back bed to cover the frame. not sure if I will use this or move the box back and make a filler for the...
Charlie has been picking away at it. he has the fenders and splash aprons, mounted and he brushed a coat of paint on them. he has been working on...
I have no room for it .....but I want it.
[ATTACH] [ATTACH] one I painted years ago
another video I worked with Larry on. good hot rod material. [MEDIA]
making sure the housing is getting vacuum is important also. it must pull warm air from the heat tube into the chamber to open the choke quicker....
I have the door top blasted
rear side windows have straps door glass uses rods with handles that lock in place
put the trim back on with new screws .[ATTACH] [ATTACH]
more wood work.[ATTACH][ATTACH][ATTACH]
I had to make a new inner board for the bottom of one of the doors and both outer boards that follow and support the inside of the bottoms of both...
it is working out well
1921
yes, but that project is not for a while.
[ATTACH][ATTACH][ATTACH]
Charlie wasted no time making stuff work. he installed the steering box, and removed the angled floorboard sills. Today we shifted the body...
[ATTACH][ATTACH][ATTACH][ATTACH][ATTACH] more shots of the day we set the body on and mocked up the pieces
[ATTACH][ATTACH][ATTACH][ATTACH] Charlie built the chassis using a model A engine and rear, used a "pause shift" era transmission with an adapter....
[ATTACH] [ATTACH] here is a build thread of the truck Charlie built before he started this project:...
Charlie's new build here: https://www.jalopyjournal.com/forum/threads/t-body-on-a-frame.1278530/#post-14669576[ATTACH]
[ATTACH] [ATTACH] [ATTACH] [ATTACH] I bought this project for a body for Charlie's project. he had started building an A chassis and this is what...
no Charlie wants to use a model A
yes
I can get the measurement tomorrow
loving it!
1/2?
not that far away: American Metal Customs in Danbury ct.
Separate names with a comma.
The Jalopy Journal
