The Jalopy Journal
Looks to me like a skim coat of Bondo failing, seems to thick for paint. Ralphie
Boat!!!
BINGO
Looks like to much tongue weight to me. But what do I know!!! Ralphie
You lucky sombitch, Beauuuuutiful .
Maybe the spindle is blocking my view of two adjuster slots your starwheel isn't behind the one slot I can see and it would be tough adjusting the...
I don't believe a 30 gallon tank and 5 HP can provide the volume needed to use a HVLP gun successfully, maybe the first few seconds of spray time...
Are you setting the crank in the proper position before setting the lifters on the right cylinders, then rotating the crank 180 degrees to set the...
Trade the 350 for a 200 4R, should fit in the same hole, trans mount may have to be moved. Some one who has done it will chime in soon I believe....
Bank deposit bag stuffed with money, another tine a hand bag. I'm as honest as the day is long returned all. 1/2 " air ratchet that I kept....
Bondo!! And maybe metal welded to fender lip first. It's a custom after all, buckets of bondo is ok .
Check out my avatar, Etch primer and paint after sanding with 220. Zero problems, and it looked exactly like yours when I started.
Assembly manual available from Ecklers Classic chevy parts in FL. If your rebuilding a Tri5 you gotta have this manual.
I'm in the broken motor mount camp as well.
What it really is is the footrest from a barbers chair minus the rubber foot board. Those bolts are way to heavy to be toilet seat cover brackets.
It's true what they say about Mass. drivers, cant drive for shit. Check out the license plates, most are Massachusetts.
I know very little about flatheads, is that an aluminum block??
Weren't some of those pumps reverse rotation for cars with serpentine belts?? Maybe you got the wrong pump!!
If you are holding the gun only 3-5 inches away you are putting paint meant for a 10 -12 inch (holding the gun 10-12 inches away), pattern on a...
Bite the bullet and take the hit. Court will just add more $ to the pain. Just let everyone you know to shop elsewhere.
Some say First On Race Day, Others say Found On Road Dead, to each his poison.
Either you have a real big thumb or that's a really small filter. Try and fit the largest spinon you can find,probably from a truck, to get as...
Let take a moment to thank all those GIs who's brave action a long time ago on June 6th prevented us from having to learn another language.
Aren't the wire's printed with their destination, most rewire kits have labeled wires?
I'd say a hinge is the perfect hanger for exhaust, allows the expansion and contraction of the system. Yea, Right. Ralphie
I'm speechless!! My only comment is that I hope you save that paint, it's out of this world.
I don't think the points care if they see 6 or 12 volts, try a regular 12 v coil and see what happens!!
Just read and was blown away by 14 pages of fantastic body forming, you are certainly a master craftsman at you trade. I too like working with...
I belive the pilot brg was something special I got from Honest charlie's speed shop
I did one about 55 years ago if I remember I used chev flywheel 48 ford p/plate and 48 disc and throw out brg.
Separate names with a comma.
The Jalopy Journal
