The Jalopy Journal
This is the HAMB..............buy an old one. Barn find, fix it and hop it up :)
I came through the door and snuck into the corner and never left.
There’s calculations you to find out the area needed for a speaker box, but that really only helps bass. The 6x9s in the package tray sound great...
Might hop up the second one as I can't work on anything else car related right now. My mom had surgery and I'm living here for a few months.
I can't like this quote enough. Why pay someone else to fuck up your car when you can fuck it up yourself :)....meaning you won't be pleased with...
That's basically running a 2 channel on mono into 1 sub (or other speaker).
I recently as in last few years started collecting the Classic units 130g and above just for that fact. The fact is streaming is still only setup...
I just envisioned his board up on blocks..
Looks good Bob, should be able to $$ out of the Camaro seats since they're 1st gen.
I'm with you on the music necessities.
It depends what you want to use it for, what you want it to look like and what you want it to sound like....
Upper and lower aftermarket tube shock kit for the 46-48 Ford (looks like it might lower it a bit also).
I think that’s like a GM fuel filter fittings (90s-2000s) and a/c 134a. The o ring denotes what type of system it’s used in. Like said above the...
Saddleback was the only local community college to have any auto classes when I was growing up, my HS had a VERY, VERY weak shop class (no...
You either need to put in a light OR use a diode. I personally run a light on everything, I like the idea of seeing a problem before the battery...
I think that might be your easiest way out if that will give you enough room. Easier to find some A or T pedals then to source out some odd makes...
I just had to heat and bend mine a little bit. But mine is slightly split, not out to the frame rails.
Find some Model A pedals, cut the ends off, weld on the right bolt and get some pedal pads.
Thanks they're all fixed. I have almost the same setup with all T leaves except the top A leaf for width. I didn't think I'll need to reverse the...
@drdave could you repost the pics of the rear spring setup, they're missing and I'm in the same boat.
Isn't it Mel Gross?. He's the one that does F100 conversions.
Isn't this one????
This the best type, all the knowledge and no physical contact :).
It’s a kin to the early Mad Fabricators dvds.
Here's my old panel.
I figured that the awesome 90s Cragars weren't your first choice. :).
I'm kinda weird when it comes to lowering stuff, I like them lowered but...
You need taller tires, I had 215/85 lt 16 on my '54 panel.
The go to 9" for those were F100 from 67-72 I think, just had to move the pads. What's...
Have them on my Elco (since '94 when I got the car on the road) and found another used set of 15" for something in the future.
Only pic I have...
For a single master you could look at the Chrysler master pedal combo that bolt to the side of the frame.
That looks like a Briz bumper. Another fun fact is that picture is in the CW Moss parking lot.
35 is 5 on 5.5
36-39 is wide 5
40-48 is 5 on 5.5 <<<< Ring is needed to run wire wheels
49+ is 5 on 4.5
Separate names with a comma.