The Jalopy Journal
Could you bolt it in a car and start it? :D
I can't believe that chevy didn't just bolt right in there. ;)
I agree it's a cool car. I almost bought a bucket seat one, not a convertible but it had the 383 commando. Should have bought it the 500's were...
An olds with chain driven blower and twin 4 jet rottenchesters. Bitchin!!! And check out the valvecovers! And nowadays the naysayers will...
You can cut off the extended bellhousing off the block right? Lippy
Sure slicks up the frontend.:) Little duct work from the radiators to the body inside with trap doors and instant winter heat!! Lippy
That's a snazzy Plymouth!!!
At night we just looked for who's flames went out first.:D
What kind of plug and number is in this thing? Lippy
If the spark is pink the condenser is bad. A condenser will act like a fuel pump. It will run down the road for a bit then quit. Turn the key on...
Didn't know there was a 292 in 55. Anyhoo neat car. Lippy
I agree I wish I could track it down. I think it's bitchin. Lippy
Dooley, I had a 64 corvette coupe, it weighed 3,075 lbs. It was a stout 300 327 with a glide and 3.73's. It also would run 90 in low if you...
The dent will come out but what will you do about the welded, moulded fender? I see your in a pickle. I'm with rusty, replace the fender but you...
But at the time I don't remember the tail lights like that either. May just be my mind. I thought the rear was smooth. That was long ago . Lippy
I grew up 28 miles from Greensburg and I ran that hiway a lot going to wichita, I lived in Kinsley. The car was not there very long, But I saw it...
The color I see in those pics is not the colour I saw. Like I said the colour was a light silver green. Lippy
I also remember seeing the chevy about 70-71 in Greensburg Ks in front of a bodyshop on the south side of the highway. That timeframe is right on...
Get well soon Jay. What a nice guy and ambassador to the car and mechanical everything hobby. Lippy
New BSA rocket 3's came with a piece of foam under the engine. Between the frame and engine. No shit. Kept the showroom floor clean. Lippy
It takes a bigger engine to pull a higher gear. I hope I'm not speaking too simple for you. Lippy
Like NHRA. You pay us then you can race. :(
Shades of Clark Kent!!!! Neat car! Lippy
I think automobiles and industrial engines were two different things. I remember seeing 1927 and 32 combine engine numbers. Lippy
Remember, do not stand on the ground behind the car and operate the clutch while hooking up implements. :D
I got a Keith Black T-shirt but I spent a hell of a lot more than a grand. LOL.
Your gonna need the actuator(button and lever assy and trans and cables. Thats it. Lippy:)
My 65 belvedere plymouth was a column shift but still had a cable to make it work, it also had park. so I don't think it's a big deal. 64's were...
Thanks guys best damn bunch of pics I've ever seen. Lippy
Separate names with a comma.