The Jalopy Journal
33,000 ORIGINAL MILES. New 350 Chevy engine, 350 transmission, Chevy rear end. Every thing mechanical is either excellent original, new or...
Complete chassis restored with dropped '32 axle, '40 Ford engine, brakes and wheels, '32 transmission, '32 rear end with new bearings and 3.54...
33,000.00 mile Mild Custom, new paint, new 350 engine, 350 trans., 57 Chevy rear end, 3.08 gears, air conditioned.. Never any rust, original...
5 gauges in all. 3 oil pressure gauges, 1 fuel level gauge , 1 vacuum gauge. All are mechanical. 2 5/8'' diameter. $125.00 + shipping Dave...
[ATTACH] [ATTACH] This is a reproduction that was installed in a '32 frame and then cut out. The plates on the ends are part of the boxing plates....
It has been removed from the frame and then flattened. It's ready to rivet , bolt or weld back into the frame. Just suffice rust, no pits....
Very good condition, numbers are lightly yellowed. 2 5/8'' diameter $60.00 + shipping.[ATTACH] [ATTACH]
Excellent condition vacuum gauge 2 5/8'' diameter. $80.00 + shipping. Dave 636 861 7376[ATTACH] [ATTACH]
Oil temp. gauge in excellent condition. 2 5/8''. I assume it works. $80.00 + shipping. Dave 636 861 7376[ATTACH] [ATTACH]
Excellent oil temp. gauge. 2 5/8'' diameter. I assume it works. As you can see in the photos it has the older cable. $80.00 + shipping ....
Excellent condition, 2 5/8'' diameter. It might never have been used. $80.00 + shipping. Dave 636 861 7376[ATTACH] [ATTACH] [ATTACH] [ATTACH]...
In excellent original condition. 2 5/8'' diameter. It might have never been used.[ATTACH] [ATTACH] [ATTACH] It's probably over 25 years old....
Bucket is very good with 2 small digs. Needs a few small parts. Dave 636.861.7376 or oconrad32[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Overall it in pretty good shape. 2 small digs in the bucket, look at the pictures...
Very nice flattened cross member. It was cut from the frame, flattened and the ends were unriveted. Just bolt the ends into you frame, measure...
Very nice flattened 32 Ford [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] rear cross member, no rust pits to speak of. It just needs to be welded...
It was a nice original cross member. It has been flattened and needs to be welded back together and installed. $150.00 O.B.O. plus shipping...
'36 windshield is chopped 2 inches. Upper part of frame is fairly good,[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] the bottom part is pretty...
2 15'' reversed Mercury wheels. They look like professionally reversed because they are riveted together. Painted dark blue. No rust pits to...
I'm not sure if these are home made or factory made. They are 9 1/2'' from end to end. The bung is tapered. [ATTACH] [ATTACH] They appear to be...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] NEW OLD STOCK ,Lyon...
These are 4 New Old Stock Lyon hub caps. Only one has a ding. I'm pointing it out with my finger. The rest of them have no dings, dent, or...
Does anyone know the guy in Ohio who made an adapter kit to bolt a 39 master cylinder to a 32 k-member using stock 32 pedals?
Can someone give me the distance from the bottom of the gas door opening to the top of the stainless steel spear on the left rear quarter panel of...
Can someone tell me what the difference is between Ford F1 and F 100 front brakes is?
BIG stop light, slick black paint on body. Chrome rim is very nice but does have some small flaws. Lens also has some small flaws but from 5 feet...
Can any tell me what Ford this yoke came on from the factory? I'm talking about he round metal hunk of metal just behind the yoke. It turns with...
I have a pair of new Traction Masters that came painted black. But if I remember right in the '60s they were painted gold. Am I right or...
One, 16'' Kelsey Hayes bent spoke wire wheel. 1 spoke has been cut out. I don't know why. 4'' wide. In otherwise very good condition.Freshly...
Please let me know. Thanks.
Separate names with a comma.
The Jalopy Journal
