The Jalopy Journal
Does anyone have part numbers for all the bearings/parts needed to a halibrand 101 case. I know hotrod works has the pinion shaft and lower...
Is there a Frankland quick change that lets v8 ford banjo bells bolt right up to it. Or do you always have to use adapters. Also what Frankland...
Sometimes you just need to put a few modern things on the old hotrod. I like to keep everything as traditional as I can but when a generator can’t...
Sold. Delete.
Getting close to firing my 21 stud and wondering what jets and pv to be used on it for initial start up. Thanks for any info. ‘37 21 stud .020...
Other than Mac’s speed in New Zealand who in the states makes a transmission adapter for Flathead v8 to the Ford F-150 T170 RTS trans? Thanks.
[ATTACH] HAMB’ers, i was thinking of posting this on fordbarn but would probably get shunned out of there for this idea/question. Fun...
HAMB’ers who else does spline cutting. I need my f150 trans main shaft turned and milled to my Model A 6 spline. Moser engineering told me they...
What are some early hot rodding documentaries. Looking for videos if any. Thanks.
[ATTACH] [ATTACH] Don’t know if anybody makes them but I’ve got a 4” dropped Superbell 48” axle on the car currently. Looking at the front of the...
Hamb’ers, is there a difference in the 28-31 Model A spindle vs 37-48 spindle where I marked in red on example photo. I know the hub areas change...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] After a few years of wanting a model a coupe I finally got my hands on...
Hey everyone, I’m fairly new to the model a area and being on the HAMB. Had a question on the front end. I recently lowered the front using a...
Got rid of the stock tail lights and put some 50 Pontiac tails in. I got some 6 volt 1158 bulbs hooked the black wire to the red(power) Hooked...
Separate names with a comma.
The Jalopy Journal