The Jalopy Journal
I have a Ford 9" 3.75 with an Auburn cone type LSD I have read on various sites, as they wear, they introduce fine metal dust into the 3rd member...
If one was to shorten up the throw on a 3 speed manual column shifter a bit Moving the holes closer on the column arms to the column ? Or moving...
61 to 66 F100 parts ..... hoods, bumpers, tailgate outer skins, etc US Body Parts now wants $700 plus $300 shipping for a hood with full pay and...
I have a ton of FE parts I could sell to finance a gen 1 hemi for my old truck Does not need to be fancy, always wanted a hemi for the looks Truck...
Ricky.
For rebuilding or core Will fit in Large flat rate USPS priority box... $21.00 shipping Rochester Quadrajet 17082224 1692 F JP Has some...
Was reading this old thread and thought I would ask https://www.jalopyjournal.com/forum/threads/carter-dual-quads.818648/ I have an old...
Mopar 833 OD 4 speed trans .. A or b body tail housing NOTE: This an Over drive transmission The tail housing is cast iron .. the rear...
Any know how much a 1953 to 1960 F100 front axle weighs with or without spindles ?? Humor me please .. EDIT: No, not gonna buy a 64 or down...
Any know how much a 1953 to 1960 F100 front axle weighs with or without spindles ?? ....EDITED ...Any know the king pin inclination on the above...
1957 Pontiac grill .. used Chrome is mostly gone and 2 of the 6 mounting brackets are bent in a small amount 1 of the brackets is bent out a...
Removed, wrong section Ricky.
Have a set of 1974 F100 disk brake spindles on my 1965 F100 Would like to use them on an F1 axle instead of buying a disk brake kit for the F1...
Cleaning out my garage, I have 2 sets of hubs and 1 spindle Not sure what they are off of and if they are of any use to someone [IMG]uploadimage...
Perhaps someone knows what these came off of ?? The aluminum one is: 25 " wide 9" top to bottom The steel one is: 19" long 9" wide at widest...
65 F-100 ....... If I were to install a straight axle in the same place and same dimensions as the twin I beams would my draq link, drag link to...
I have a T-10 4 speed that I need some info on if I may. It is a Ford trans with the small bellhousing pattern It seems I need a shorter tail...
I wish to install a tube axle in my 65 F-100 with coilovers. I have read pros an cons such as ..... With a Ford straight axle you use a hair pin...
Anyone run or have run Stromberg WW or WWC carbs, 1950's types ?? ..or Carter Wxx series carbs 1940/1950's ?? I have an Edelbrock 3x2 setup...
Who do I contact about not receiving parts I paid for ?? Not calling anyone out but I paid on November 13th and have not had my PM or email...
A friend of mine asked me this question: ..............................................................................................
Hi, Richard here. I live in Friendswood, Texas. I ahve built most of the cars I have owned from shells, mostly Mopars. Now I have 2 Fords, 1...
Separate names with a comma.
The Jalopy Journal