The Jalopy Journal
[ATTACH] [ATTACH] Got mine up and running........
Yep valve covers too. November - Will depend on when you got in line - Ask Roland for an ETA. http://chryslerpower.com/webstore/Poly ;)
[ATTACH] The faithful are being rewarded...... Received mine........
Independent appraisal came in at $2,000......
Latest upgrade - cut and welded a driver's side exhaust manifold opposite to fit the passenger side. Passenger side before was center dump with a...
More teaser pics form 3/25 and 3/26: :cool:
The Doctor's coupe before and after it's first bath. ;)
Here's a couple pics of the T when it was in Grandpa's dirt floor garage circa 1990. Grandpa was a bit of a hoarder too. :cool: And the...
3/05/14 Foundry visit pics:
Or is it KQQL .........
All fixed from her collision at the hands of the front end alignment shop......... Deedee is one fine looking girl........... ;)
Wondered if anyone would spot the 1980 Shay red herring. ;) These are both part of a favorite Uncle's estate, the same one that returned my '53...
Southern California sun........... ;)
Here she was on the hook heading home - fun loads!
Latest updates - NOS Chevrolet hood emblem and NOS grill guard. I actually gave those to Uncle Bob with the truck back in the day. Then we both...
When I had the heads done on my '62 318 Poly there was one loose adjuster. Local National auto parts had some new adjuster screws on the shelf -...
My wagon suffered a mishap during the test drive - after the front end alignment - at the hands of the alignment shop. Anyone have a line on a...
Rebuilt the original A-arms - glad I did even if they were not the alignment culprit. Upper ball joints loose and barely threaded into them when...
More pics.
Gary - Are the valve covers going to be available with just POLY on them or just finned?
Thanks for the education - Just looked up the optional radiator cap that it has with it. Motometer!
I know little about the Tin Lizzie.... What model is this one called, tall coupe or what? What would be a fair price to pay for it? An...
Eaton is good but pricey. Try ESPO...
Build the 318 Poly you have - great engines. New manifold coming out for it: http://chryslerpower.com/webstore/Poly-SS-Manifold :cool:
Alignment shop could not get her to come in - prime suspect is cheap repro upper A-arms. Going to rebuild the originals and try again. Does drive...
No longer a Mopar torsion suspension virgin. Have the new front suspension parts all in. Bit of a chore with the learning curve, but did figure...
Finished up putting on the new rear springs on the wagon last night - rides a bit more compliant - and sits over an inch higher. So the old...
Just like to recommend a leaf spring source to the group. American made quality, yet priced very reasonable. I looked high and low for a source,...
COE Duracell Xmas commercial: http://www.ispot.tv/ad/76LH/duracell-quantum-toys-for-tots ;)
A couple more Rochester guru's to add to the list: http://www.cliffshighperformance.com/ http://www.smicarburetor.com/...
Separate names with a comma.
The Jalopy Journal
