The Jalopy Journal
Bump
This is an unused rebuilt Flathead fuel pump from 3rd Generation auto.If you are Familiar with 3rd Gen. you know the dedication that Mike has to...
Appears to be complete crab distributor base for Ford Flathead. Turns freely, no cap just the distributor base. $40.00 shipped in the upper 48 states.
Nice 2 bolt timing cover for Flathead. This is for the Crab type distributor , which i also have listed seperately. $55.00 shipped in the upper 48...
Here's a vintage Hollywood tag light in excellent condition. Has patina from sitting around for years but i'm sure it would polish up very nice. I...
bump
Bump $60.00
Here's an early Edmunds flathead in excellent condition.Has dust and dirt on it from sitting on a shelf for decades.Generator mount is perfect...
48/49 f1 column. Great condition, nice splines and turns very smooth from stop to stop.Getting harder to find.Steering wheel NOT INCLUDED but will...
Here's a very nice pair of 37-41 round back spindles just removed from the original axle. Nice threads and tie rod bores. Steering arms never...
Here's an old pair of California Custom 40-30 scoops. They would need replating for a rrstored car but have great patina for the guy that wants to...
Disassembled, has 2 badly burnt valve seats w/cracks and about a 2 inch crack in the pan rail that does not extend down the sides. I'm told it is...
This is a brand new Sealed Power/TRW flathead oil pump. I believe it to be a Melling that came re - branded in a Sealed Power box because it is...
Pretty sure they are 337 Lincoln. They sure didn't do the 59ab any good !
Sorry for the delay, Here is a pic of the disassembled lifter for all those interested.
Here's a very nice pair of 37 to 41 Ford round back spindles. Just taken off the original axle so never had the arms heated and bent.All threads...
Here's a 39 Ford "Swan"shifter that has been shortened on top by about 3 inches. It has been re threaded for a knob. The stub is good . Shown next...
Here's a pair of NOS 42 thru 48 Ford rear radius rods from an old dealers inventory. They have never seen use . They are straight with no rust ,...
Here's a large logo Stromberg 97i recently got in a parts buy out. I'm told it has been rebuilt . It feels like it has been but i havn't been...
Really nice,not heavily pitted,no damage and bushings are reasonably tight. These have become very popular for A v/8 conversions.Asking $100.00...
So here is a vintage Offenhauser 3 x 2 intake for 371 olds. I originally thought it was a 324 intake but after much input from Hambers in the know...
Thanks for the kind words !
Thanks John, may have to come by and take a look.
Great story Mike,thanks for sharing. In 1958i was too young to drive but remember watching my dad fix flats at his Gulf gas station in Brentwood...
Thanks a bunch, may take you up on that.Bob
Thanks John, the mounts seem to be the hard to find item.I heard Belmonts rod and custom repops them.Im sure I could fabricate a set also.Tuens...
So definitely 371. Thanks guys !
Separate names with a comma.
The Jalopy Journal
