The Jalopy Journal
When removing leafs from a spring group, or pack What is the best way to remove leafs if there is one. On my 1959 F100, I am putting in 4 degree...
Thanks for Posting the Pics. I am 15 minutes from the show, I had no idea it was yesterday. I know the Brimfield Nats will be coming up. Both are...
I bought this for another project I have since sold. out of an 88 chevy 2wd blazer. I will consider trades.... Y-block Ram horns, ect. 59 F100...
I bought a Champion Radiator (Lake Elsinore C.A.). It is fully tig welded, and has a lifetime guarantee. I went through Big Dog performance (Sue...
it does suck for sure. I always renewed my subscription at the GoodGuys Columbus show.
Champion Cooling is making 3 core radiators, they are not in production yet, but doing special orders. They will be in production in the fall. I...
Windsor Blocks make HP and TQ simply by letting them breath. So most of the work should be focused on the top end. Make sure the shop chamfer's...
That is not a Mustang II so rule that out. Reminds me of a chevy... But Volarae was popular but had torsion bar suspension, no springs....
Its dirt. I had issues, it was dirt, and it came from the glue in the filter coming apart. Edelbrocks operate best about 7psi. If you run...
I kicked around a T-5 out of an S-10. I also kicked around a 905. The T-5 ... there is an adapter wilcap makes, and also Tom Langdons...
The older ones where hp robbing so I imagine it wouldn't be easy. Posted using the Full Custom H.A.M.B. App!
That's a lot of info.... From my past I owned a Plymouth 230 flathead. It really woke up when I did Tom Langdon Mini HEI. and converted it to 12...
Thanks everyone. That was the connection I was lookin for Stimpy. Painless wants $30 bucks for the whole thing, and no one sells the male end...
So cool. Be Safe !
Does anyone have a part number for the spade wire connectors that go inside a early GM steering column plug? Painless sells the harmonica...
42 has a facebook page with current updates. I also am hearing they are dealing with a lot of trespassing issues. I think they put up gates as...
I have 3 great experiences when I needed to use my ins. 1 was in Mich (No fault state) I was on vacation. I got rear ended. The out drive of the...
I have everything I own ins with State Farm. They have always been awesome. Lets face it, ins is a bargain if you need it, and rip off if...
I just finished doing the turn signal wires on my 59 F100. There is a thread which helped me, I started it and Crazy Steve spelled out how to...
I would rather open up the exhaust ports on the 302 heads, and 2.02 intake valves and use a 351 cam and firing order. You would gain better power....
I got it. Thank you both ! The wire kit is a Speedway wire kit based on a GM harness. SO I wasn't comprehending the circuit, ( Ford, Chevy...
the orange dome courtesy feed routes to the courtesy power feed. most courtesy lights are activated by the headlight switch or individual door jam...
I would think around 3.00 but it depends on the cam and converter. If you have a higher stall converter, you need to make sure your cruising speed...
I figured that Steve, my confusion come in trying to wire the door switches. I am getting confused with this concept. The socket is grounded...
I am hopin for Crazy Steve to chime in, I am now wiring my interior courtesy/dome light. I have 2 wires, 1 is always hot, the other is...
Thanks V8, I assumed it's was a result of cab movement, and Ford also used the same steel to rubber line front the clutch m/c to the slave...
It is stock, from the factory. Posted using the Full Custom H.A.M.B. App!
I simply want to use steel. I am thinkin a few loops will achieve the same thing as rubber used to. Posted using the Full Custom H.A.M.B. App!
I have a steel to rubber back to steel brake line that runs off my master cylinder, down the firewall, to a junction block. Its dry rotted, I...
Separate names with a comma.