The Jalopy Journal
I talked to me and I don't have the pattern for that one. My guess from looking at it is that it was probably made by a local foundry or in a shop...
Thanks Tom!
Little late to the party here - I knew Van and Marlene through NSRA when he was an official in Illinois and then later when he moved to CA before...
Nice find Bill:)
BTW Dave - I forwarded the info you gave us to Jack & Nita Underwood, Al Drake, Bill Junge and Greg Sharp so they'll all know about the "other"...
Well Dave that sounds like you win the prize for solving the puzzle! I know that someone on the HAMB would have the answer! Thank you Sir!
I sent a message to Bill Junge and Greg Sharp also.
I have already sent him a Message - Thanks Mick and Happy Thanksgiving!
Thank you Mr48 and Jimmy. There is a Spokane Country drag strip (SC TA) but that's on the other side of Washington. Maybe someone out there...
Done....
So a gentleman contacted me to have me make a car club plaque from an original pattern I have for the Valve Lifters of So. Everett (Washington)....
Respect......
Missed this thread Ray. Did we ever speak about their car club plaque. Well so happens I have the original pattern that was used by Chicago Metal...
[ATTACH] That is a picture of the original Masonite and linoleum pattern (which I have) and is one of the 4100 plaques made by Speed Gems in the...
No guessing there - that's for sure!!
You're referring to Roy Idman I assume - best known for his dozen different louver press dies? :) He looked fine the last time I saw him but that...
If there were 1932 Ford numbers stamped on the frame I'm guessing the factory didn't do the stamping:)
Well if it wasn't for that No Club Lone Wolf I got from the late Buddy George (RIP) in 1977 I wouldn't have made the 175.000 plaques I've made...
A friend of mine got this sedan and it came with a title saying it was a 1931 Ford. Well it's pretty obvious that it's not (unless it's some...
I measured the square inches of exposed element surface three different cotton gauze elements that are used in my air cleaners (they all made in...
Been two years - any updates?
Is there a picture around that would tell me what that aluminum lump is on the cowl of the Deuce RPU?
Damn that's such a huge bummer. Bruce looked like a librarian who got lost at a car meet (for good reason) but if you asked him a question the...
Mine (O'Brien Truckers) are modified inside to take a replaceable washable element that filters much better than the ancient oil bath method. I...
Nope never had anything but 2 5/8" and I don't have those any more. Do have the 2 BBL spark arrester style a/c's in 3 1/8" though....
Yep, since my wife passed last year, when I'm not here the dog doesn't answer the phone for me:( Glad you're happy with the Last Hurrah plaques I...
Dennis O'Brien here. The picture that Bill posted above is of the original pattern used to make your father's car club plaques back in the...
Here's what I have for 1950/60 patterns with Ogden on them: Nomads Ogden Piston Poppers Ogden Renegades Ogden Road Saints Ogden Utah Rod...
So fortunate to have met Gary a few times including once when I went on the Friday garage crawl with Norm at the LSRU that included a stop at...
For what it's worth, I'm Dennis O'Brien and own O'Brien Truckers LLC (www.obrientruckers.com) and have manufactured over 165,000 car club plaques...
Separate names with a comma.
The Jalopy Journal
