The Jalopy Journal
Check out Subaru Jasper Green metallic.
[IMG]
Years ago changed the oil on a Cat 3208 engine. Had most of the oil in it, but hadn't screwed the new filter on yet. Had to go on a wrecker run...
I've never taken mine off. [ATTACH]
My parents had a 76 Century with a 350 that slipped the ring a bit. The old man took it in for a tuneup and the "mechanic" that did the work said...
I cleaned mine up in Evaporust and blasted them with Fluid Film.
Battery jar. A family friend had a small room full of them in their cabin (bult in the 20s IIRC). Charged with a 32 volt DC Delco Light Plant.
Are wreckers really that expensive in your area? We'd do an in town move like that for $50 if you didn't have to have it RFN and said do it when...
[ATTACH] The glory days of war surplus. How could you not?
We did it in the 1980s. Cruise around looking for the action. Now the kids text around and never leave the house.
The whole point of carbide insert spade drills is to replace the inserts with new when they're dulled up. Try KBC Tool.
Mine is tied with lacing anywhere you can't see it. Anything visible is in woven covering like posted above. I'm not traditional.
4.0 SOHC Ford.
Lots of cheap houses in Detroit, if you dare. The Henry Ford Museum in Dearborn is a cool stop if you haven't already.
You can also put the sender up at the plug near the distributor. That's where I have mine.
Floor mounted handle from a popular foreign car. Starts with H ends with A.
Take the visor off if you can. Or. Gravity feed gun with 3M PPS cup system or generic version of it.
Only six? They must have been poor. [IMG]
Not traditional at all. If I like something, I like it. New, old, rat, rice, don't matter to me if it presses the right buttons.
Bought a shorty set about 20 years ago. Still have them, no complaints. I live in an area where you can't just walk into a store and buy high...
I HATE the way the chambered Flowmasters sound. But I really like the sound of the Super HP2 Flowmasters on my 463" Pontiac powered...
Seems a little excessive. Cut the filter open and see what's in there.
I'm not totally against a rattish looking car, but that one, like most, is trying too hard.
I tried a few different cheap glass packs on my truck and couldn't find anything that had the sound I was after, even tried some of those auger...
I did epoxy over the bare sand blasted body, then all my filler work, then hit all the filler and any bare metal spots with epoxy again. One coat...
The "beep beep, hi how are ya?" horn is behind the grill in front of the radiator. The "RESPECT MAH AUTHORITAY!!!!" air horn from a Volvo semi...
Yes. That is a Spicer Power-lok diff.
About a year if you buy a current Interstate. At least that's how far the last three I've owned lasted. Never again.
I've done that on small rust holes. Grind the hole out back to solid metal with burr, then hold a piece of paper over the hole and rub it with...
DD shaft, DD joint, dimpled-set screw-locknut-safety wire.
Separate names with a comma.
The Jalopy Journal
